01-502-3421
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular, long sides horizontal: has (roughly) elongated semicircular cutout from upper right corner, stretching 31.24 to the left & 9.00 down (at lowedt point) ; near side is marked: "fwd" & "up" on 2 lines, crosswise, near left edge & with part number lengthwise near bottom left corner; far side has lengthwise cutout on bottom edge; see drawing for details
01-502-3435
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with long sides horizontal: cutout from bottom edge beginning 3.42 from bottom at left edge in a roughly semicircular shape up & to the right, ending in arc with radius of 5.00, meeting bottom edge 2.04" from right edge; near side is marked with part number in upper left corner & with "up" & fwd" in 2 lines crosswise centered near left edge; far side has lengthwise triangular beginning 3.62 from top edge up at 30 degree angle toward top
01-502-3446
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with long sides horizontal: has irregularly shaped cutout on top edge (roughly semicircular with "finger" at lower right) : beginning 2.04 from right edge
01-502-3449
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular: bottom edge has 2 overlapping semicircular cutouts: one with radius of 9.00 centered 18.44 from right edge, the other with radius of 2.5, centered 28.32 from right edge; near side is marked with part number near upper left edge & "fwd" & "up" on 2 lines crosswise near bottom left corner
01-502-3455
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam irregularly shaped - see drawing for details; somewhat mushroom-shaped viewed from long edge & rectangular from top with arched cutout along right/long edge: radius of 3.125, 9.31 from top edge; left edge has cutout 3.18 from far surface, 1.62w then slanting up & to the right at 30 degree angle to near surface; top surface is rounded crosswise with radius of 26.62, ending 1.16 from top & bottom edges which are cut off at a slant to depth of 3.18 from far side then cut back in horizontally to width of 14.40, then down in 45 degree angle to outer edge; far side is marked along long edge without arch: "fwd" to left of center & part number in right corner
01-502-3508
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam irregularly shaped - see drawing for details; left long edge tapers to 15.85 wide at top edge & has cutout beginning on far surface, 1.75 from left edge, up at 30 degree angle to edge then up & right to 14.91 from right edge & 2.00 from farside, up & rt to 10.71 from rt & 3.45 from far side, to 8.71 from rt & 0.50 from top, to 4.48 from rt at top, to 0.50 from top at rt edge; top surface has graduated lengthwise angles; rt edge has roughly triangular cutout from near surface to far one, with 15 to 30 degree cuts, ending 4.48 from right edge at far surface; far side is marked: "up fwd" near left long edge, right corner & with part number near the center of that edge
01-502-3644
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam roughly trapezoidal in shape with top surface curved wih radius of 40.25 from top/long edge to bottom one; 2 cutouts on left edge: 1.75WX0.75h, 2.56 & 8.90" from top edge; left edge has hole with diam of 2.00, centered 6.14 from bottom, at far surface, extending right for 5.22", then angling down at 45 degrees to bottom edge; right edge has 1.75 diam hole, centered 4.56 from bottom, going left for 7.50" then angling up at 45 degrees to top edge; far side is marked "up" & "inbd" on 2 lines in upper left corner *far side up) & "fwd" in upper right corner & with part number in lower right
01-502-3655
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam trapezoidal in shape with near surface rounded with radius of 40.25" from top edge to bottom edge; 2 cutouts on right edge: 1.75WX0.75h, 2.37 & 8.90" from bottom edge; right edge has circular cutout, centered 6.20" from bottom, along far surface, going left 5.26" then down at 45 degree angle to bottom edge; left edge has circular cutout centered 4.60 from bottom edge, going right 7.50" then up at 45 degree angle to top edge; far side is marked: "fwd" in upper left corner (far side up) & "up" & "inbd" on 2 lines in upper right corner & with part number in lower right corner
01-502-3669
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam irregularly shaped with graduated lengthwise angles - see drawing for details; far side has cutout that is roughly triangular from far side surface to 0.50 from near surface & cutout on right edge, from 1.75" from right edge, 30 degrees up toward right edge; near side has graduated cuts from right edge at 30 degree cut up & left, meeting top surface 4.68" from left edge, then down to 0.50 from top surface at left edge; far side is marked: "bottom" lengthwise in lower right corner (far side up) & part number near the lower center edge
01-502-3674
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is tapered from right to left length-wise to 10.960 inch width
01-502-3678
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam roughly rectangular with edges tapered to 16.12LX3.75w at top edges
01-502-3693
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam psemicircular in shape with radius of 18.16"; with straight edge at bottom, there are 2 arched cutouts from rounded edge: one with radius of 2.25 centered 9.25 to left of center & 3.25 from bottom edge; 2nd cutout has radius of 2.25 centered 9.25 to right of center & 3.25 from bottom edge; near side is marked "up" & "fwd" on 2 lines near upper left edge; far side has "up" & "aft" on 2 lines near upper right edge (far side up) & part number near lower left corner
01-502-3706
Cellular Plastic Material
Used on missile, minuteman lgm-30. filler foam roughly rectangular with upper corners cut off at 30 degree angle, 19.40 from bottom; right edge has cutout 1.50WX7.0h, 1.67" from bottom; top edge has cutout starting 17.22 from right edge, extending to right edge; left top corner has arched cutout with radius of 2.5 centered 22.22 from right edge & 23.22 from bottom; center area has 3 cutouts: rectangle 1.50WX5.25HX1.50d, 16.97 from right edge & 17.14 from bottom, an arch with radius or 2.75 centered 22.22 from right & 14.39 from bottom then extending 9.50 to the right, a "finger" with radius or 3.0 from bottom edge of arch in 90 degree arc, then straight down with diameter of 3.25 ending with circle centered 10.16 from right edge & 4.39 from bottom; near side is marked "up" & "aft" on 2 lines near center top & with part number below & to the right
01-502-3725
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with 3 cutouts: a circle with 1.00 inch radius, centered 2.10 from right/short edge & 4.72 from bottom, a kidney-shaped cutout, with lower radius of 1.50 centered 3.10 from right edge & 8.50 from bottom & upper radius of 1.75 centered 2.72 from right edge & 10.50 from bottom, an irregularly shaped cutout near upper left corner - see drawing for details; near side has part number at upper edge to the left of center & "up aft" to the right of center; far side has groove: 2.30WX2.00d along top edge & "up fwd" in groove, near left edge (far side up)
01-502-3738
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam erectangle with both upper corners cut off at 30 degree angle, 17.32" from bottom edge & with oval cutouts on both cutoff edges with radius of 2.50", centered 20.00 from bottom, on cut edgesending with curve with same radius centered 7.00 up the cutoff edges; 3 cutouts: circle with radius of 1.00, centered 1.92 from right & 4.08 from bottom, kidney shape with lower radius 1.00, centered 2.10 from right & 7.68 from bottom & upper radius 1.75, centered 2.72 from right & 10.18 from bottom,
01-502-3753
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is tapered from left to right length-wise to 18.310 inch width, there is a radius width-wise from the tapered edge to square side
01-502-3754
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangle with upper corners cut off at 30 degree angle 17.00" from bottom/short edge & with oval cutouts on these cutoff edges with 2.50 radii, with lower arcs centered 3.24 from outer edges (before cutoff) & 20.62 from bottom edges extending up on cutoff edge 7.50" to upper arc; 4 more cutouts: circle with 1.06 radius centered 4.17 from bottom & 1.92 from right edge along near surface & extending to bottom edge, a kidney shape with lower radius of 0.75, centered 2.10 from right edge & 8.00 from bottom & upper arc with 1.75 radius, centered 2.72 from right & 10.50 from bottom; nearly oval, with lower arc with 1.50 radius, 3.49 from left edge & 6.31 frombottom & upper arc with 1.75 rad, 2.72 from left & 10.50 from bottom & bump with 1.00 radius, centered 1.92 from left & 8.00 from bottom, a 3 inch tube extending from this cutout to the right downward to far surface then back up to top surface at bottom edge, 10.12 from left & 1.50 from top surface
01-502-3759
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangle with upper corners cut off at 30 degree angle 20.08 from bottom/short edge & with oval cutouts on both cutoff edges, with 2.50 radii & lower arcs centered 27.14 from bottom edge, then extending along cutoff edge 7.00" to upper arc; 2 more cutouts: rounded trapezoid along left edge, lower right corner rounded to radius of 1.75, centered 3.84 from left edge & 6.08 from bottom & upper rt corner with 1.75 radius centered 2.72 from left & 10.84 from bottom; kidney shape, with lower arc with 1.00 radius, 1.72 from righ & 8.09 from bottom, upper arc with radius of 1.75, 2.72 from right & 10.84 from bottom; near side is marked: "up" & "aft" in upper center right area & with part number centered below it; far side has "up" & "fwd" in upper right center (far side up)
01-502-3763
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectanle with cutout from upper center & left edges; semicircle cutout from top edge: 9.00 radius centered 18.44" from right at top edge; a rectanglular cutout from left edge, 8.40 from bottom, horizontally to intersection with circular cutout; near side is marked "fwd" & "up" on 2 lines, crosswise, near left edge & with part number, lengthwise, near bottom right corner
01-502-3768
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangle with cutout from bottom/long & lower right edges: rectangular cutout , 30.44WX5.00h from right corner; semicircle with 9.00 radius, centered 18.44 from right on cut edge; a semicircle with 2.50 radius, centered 20.94 from right on same cut edge, overlapping fist circle; bottom left edge is cut at angle toward cutouts (approximately 22 degree angle) , there is a groove: 1.50WX1.75d along this bottom edge; near side is marked: "fwd" & "up" on 2 lines, crosswise, near center of left edge & with part number, lengthwise, near upper left corner
01-502-3941
Cellular Plastic Material
Used on missile, minuteman lgm-30. filler foam rectangular with 2 cutouts on bottom/long edge: 2.16WX2.25h at bottom right corner & 2.16WX1.75h at bottom left; 2 cutouts on top edge: beginning 9.32 from either side edge, down 2.50" then down & toward side, ending 3.50 from top edge; a kidney shaped cutout with lower arc with 3.00 radius centered 7.72 from left edge & 10.25 from top & upper arc with 3.50 radius centered 12.72 from left edge & 7.75 from top; far side has 3.00 inch deep groove 2.42" from right (cut) edge across to the right edge, extending down 5.00 from top edge then slanting toward right, ending at the right edge, 7.25 from top & an arched groove below this cutout, 0.725" in from right edge, 2.75WX3.00 deep; near side is marked: "fwd up" at center top & with part number near center of right edge
01-502-3943
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam 6irregularly shaped: see drawing for details; near side has 45 degree cut from far surface of top edge to 2.66 from top edge on near surface & markings: "fwd" & "up" on 2 lines in upper left cutout & part number in upper right one; top edge has 2 rectangular cutouts: 2.00WX3.34h, 4.02 & 17.02 from right edge; bottom edge has arched cutout with radius of 2.00 centered 6.46 from right edge & 1.92 from bottom, a lengthwise cuout 7.83WS1.92h, 14.92 from right edge; bottom left & bottom right corners are cut off irregularly; also a roughly t-shaped groove 2.75 deep with leg 14.92 from right on bottom edge of bottom cutout & crossbar slanting 45 degrees from left corner across leg to point 6.46 from right & 5.50 up, then down at 45 degrees to right corner
01-502-3949
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with arched cutout on bottom/long edge: with 2.50 inch radius centered 16.50" from left edge & 2.08 from bottom; & a line cut thru from 4.50 iinches from left edge & 7.00 from bottom to bottom edge; near side is marked "fwd" & "up" on 2 lines in upper left corner & with part number in upper right corner
01-502-3960
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with angled cutoff along top/long edge; from near surface at top edge to 5.50 from top on far surface; with cutouts on each top corner: with inner bottom corner a 90 degree arc with radius 1.25 centered 1.54 from outer edge & 4.81 from top with cutout extending horizontally & vertically to outer edges; an arched cutout, opening on top edge 12.31 & 17.31" from left edge, slanting down & to right with width of 5.00, ending in circle with 2.50 radius, centered 16.95 from left & 3.62 from bottom; a line cut thru, 1.56 from left cut edge at top edge, vertically down 5.5" on near surface & slanting down to 6.75" from bottom on far surface; near side is marked "fwd" & "up" on 2 lines at left top & with part number in lower left corner
01-502-3968
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is irregular rectangular in shape with various cut-outs
01-502-3975
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam roughly rectangular with irregular cutouts on both long/side edges - see drawing for details; has oval cutout, 1.25 inch deep with radii of 2.00, centered lengthwise 4.50 to left of center line with lower arc centered 6.69 from bottom & upper one, 9.19 from bottom; far side is marked: "fwd", "up" & with part number on 3 lines in upper left corner (far side up)
01-502-3991
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with circular cutout with diameter of 7.0inches, centered 12.25 from right/short edge & 11.63 from bottom; near side is marked "fwd up" at top center
01-502-3994
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam jrectangular with circular cutout with diameter of 7.0inches centered 12.25" from right/short edge & 11.38 from bottom; near side is marked "fwd up" at top center & with part number in bottom right corner
01-502-3997
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam srectangular with circular cutout with diameter of 7", centered 11 .10" from bottom/short edge & 8.49 from left edge; near side is marked "fwd up" at center top & with part number, lengthwise, in bottom right corner
01-502-4009
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam 5rectangular with 2 circular cutouts with radii of 7.00", one centered 38.14" from right/short edge & 13.06 from bottom; other, 16.88 from right & 15.31 from bottom; a cutout from bottom right corner, 4.50WX5.00h, which then winds up & to the left, ending in circle with 1.75 radius, centered 22.12 from right - see drawing for details; also 2 grooves 2.00" deep: one 1.12 from outer edge, extending upward from cutout, ending in circle with 1.75 radius centered 17.51 from bottom & 2.87 from right edge, the other extending at 45 degree angle from perpendicular turn in cutout downward toward bottom edge; near side is marked "fwd" & "up" on 2 lines, crosswise, near center of left edge & with part number, lengthwise, in upper left corner
01-502-4023
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with 2 cutouts on right/short edge: one with 1.50 radius, centered 2.08 from right & 2.50 from top extending from horizontal diameter to right edge & up to top edge, other with 1.50 radius, centered 2.08 from right & 17.31 from top extending from hor. diam to right edge & to bottom edge; circular cutout, 3.50 radius, centered 27.60 from right & 13.06 from bottom; circular cutout, 1.50 radius, centered 17.70 from right & 15.31 from bottom; a cutout 5.00WX4.00h, 8.08 from right & 11.38 from bottom; a circular groove on far side surface with 1.50 radius, centered 0.50 from far surface at 45 degree angle across bottom right corner, centered on right edge 4.81" from bottom edge; near side is marked: "fwd" & "up", crosswise, near upper left corner & with part number, lengthwise, in upper left corner
01-502-4036
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam roughly rectangular; near side has groove, 7.652X2.10d along left/short edge & a groove 3.25LX3.90WX5.12d at top left corner; a semicircular groove with 1.50 radius along top surface, beginning at top edge, 12.22" from right edge, angling down & to the left to 17.00" from right edge & extending horizontally left to cutou edge; near side is marked: "fwd" & "up" in upper right corner & with part number in lower right corner
01-502-4056
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular; far side has lenthwise groove along top edge, 1.00d, tapering from 4.00w at right edge (near side up) to 3.00 deep at left edge; an arched cutout along top surface, 3.00w, 1.12 inch from right edge, ending in circle centered 2.67 from right & 4.87 from top; a semicircular groove on far surface with 1.48 radius, centered 23.81 from right edge at top edge, angling down
01-502-4070
Cellular Plastic Material
Used on missile, minuteman lgm-30. filler foam rectangular with cutout at lower right corner, 4.60WX2.46h; a kidney shaped cutout with one end having a 2.00 radius, centered 3.42 from left edge & 10.25 from top & other end with 3.50 radius, centered 8.42 from left & 8.00 from top; a semicircular groove on far side surface with 1.50 radius, 2.25 deep, centered 3.22 from left at top edge (near side up) & extending 11 degrees down to left edge; a trapezoidal groove on far side surface, 2.65 deep with endpoints 12.12 & 19.92" from left at top edge
01-502-4104
Plastic Molding
Used on lockheed l1011 tristar, lockheed martin corp. trim strip for interior panel
01-502-4363
Cellular Plastic Material
Used on missile, minuteman lgm-30. filler foam hrectangular with cutouts on bottom/long edge: 2.75WX2.12h at each corner; a kidney-shaped cutout with small arc with 1.50 radius centered 7.72 from left edge & 10.25 from top & large arc with 3.50 radius centered 12.72 from left & 8.28 from top; near side is marked: "fwd up" at center top & with part number above lower right cutout; far side has arched crosswise groove with 2.00 radius centered 3.47 from right edge (far side up) & 1.00 from top surface
01-502-4376
Cellular Plastic Material
Used on missile, minuteman lgm-30. filler foam rectangular with cutouts on both side (short) edges: 3.00WX2.00h, 1.80" from bottom edge; a circular cutout, 7.00 in diameter, centered 12.72 from left & 8.53 from top; near side is marked: "fwd up" near center top & with part number in lower right area
01-502-4383
Cellular Plastic Material
Used on missile, minuteman lgm-30. filler foam roughly rectangular with cutout on right/long edge: 3.98WX1.50h, 1.78 from bottom & adjacent cutout: 1.48WX1.78h at bottom corner; left edge has cutout 4.22WX1.50h, 1.78 from bottom & cutout 2.50WX1.78h at left bottom corner; a circular cutout near center with 7.00 inch diameter centered 8.97 from left & 8.79 from top; long edges have curved grooves: 2.50WX2.50d on left edge with 1.50 radius on inner edge & 2.50WX2.50d on right edge with 1.50 radius on inner edge, widening near top to left with arc with 6.50 radius centered 8.97 from left & 4.78 from top; near side is marked "fwd up" at center top & with part number at bottom right
01-502-4389
Plastic Spiral Wrap Tubing
Used on 1520-01-106-9519. 1.000" inside diameter
01-502-4392
Cellular Plastic Material
Used on missile, minuteman lgm-30. filler foam rectangular with long sides vertical: has circular cutout, 7.00" in diameter centered 8.18" from left edge & 9.07 from top; near side is marked: "fwd up" at center top & with part number in lower right corner
01-502-4393
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape with hole
01-502-4398
Cellular Plastic Material
Used on missile, minuteman lgm-30. filler foam rectangular with long/vertical edges tapered lengthwise - see drawing for details; near surface is also tapered from height of 2.90 at one short end to height of 1.70 at other end; a circular punchout with 7.00 inch diameter is centered 8.43 from left edge & 9.31 from top; near side is marked: "fwd up" at center top & with part number below
01-502-4407
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape w/chamfered ends
01-502-4427
Cellular Plastic Material
Used on missile, minuteman lgm-30. filler foam rectangular; left/short edge has crosswise groove: 3.75WX3.00d along edge; a circular cutout near center: 7.00 inch diameter centered 12.25 from left edge & 10.87 from top; near side is marked with part number crosswise in upper left section & "fwd up" lengthwise at bottom center with tops of letters toward edge
01-502-4435
Cellular Plastic Material
Used on missile, minuteman lgm-30. filler foam rectangular with cutouts at both corners of bottom/short edge: 3.00WX2.00HX3.00d; a circular punchout with 7.00 inch diameter centered 7.50 from left edge & 10.59 from top; near side has part number near top left corner & "fwd up" at lower center edge with tops of letters toward edge
01-502-4440
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape with chamfered edges
01-502-4442
Cellular Plastic Material
Used on missile, minuteman lgm-30. filler foam rectangular with 2 cutouts on bottom/short edge: 6.38WX2.00h at each corner; a circular punchout with 7.00 inch diameter centered 8.81 from left edge & 10.31 from top; lengthwise edges are tapered - see drawing for details; top surface is tapered lengthwise from thickness of 5.93 at bottom edge to 3.52 at top one; near side is marked with part number in upper left area & with "fwd up" near bottom center with tops of letters toward outer edge
01-502-4449
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with 2 cutouts on left/short edge: 1.25WX1.34h, 1.72 from bottom edge & 1.25WX1.04h, 2.10 from top; lengthwise cutout 2.10WX1.25d along top edge; semicircular groove running parallel to long edges for 10.80" from left edge with 2.00 inch radius centered 6.40 from bottom edge & 0.50 from top surface; near side is marked "up" & "fwd" on 2 lines at center top & with part number in bottom right corner; far side is tapered 0.25 at top edge & 0.40 at bottom edge
01-502-4453
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with cutouts on left/short edge: 2.00WX2.50h at bottom corner & 1.25WX1.12h, 12.25" from bottom edge; a crosswise groove: 1.00WX1.50d, 9.72" from right edge; near side is marked "up" & "aft" on 2 lines in upper left corner & with part number in lower left corner
01-502-4454
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with 2 cutouts on right/short edge: 2.00WX2.50h at bottom corner & 1.25WX1.12h, 12.25" from bottom edge; a crosswise groove: 1.00WX1.50d, 8.72" from right edge; far side is marked "up" & "aft" in upper right corner (far side up) & with part number in lower right corner
