9330015023644
Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
9330-01-502-3644 Specification Set by the OEM (see RNCC code 3)
not fire retarding
16.210in.
7.720in. ⁓7-47/64"
33.710in.
aircraft, thunderbolt ii, A-10
rough
1.2 pounds per cubic foot
0.35 pounds per square inch
filler foam
roughly trapezoidal in shape with top surface curved wih radius of 40.25 from top/long edge to bottom one; 2 cutouts on left edge: 1.75WX0.75h, 2.56 & 8.90in. from top edge; left edge has hole with diam of 2.00, centered 6.14 from bottom, at far surface, extending right for 5.22in., then angling down at 45 degrees to bottom edge; right edge has 1.75 diam hole, centered 4.56 from bottom, going left for 7.50in. then angling up at 45 degrees to top edge; far side is marked "up" & "inbd" on 2 lines in upper left corner *far side up) & "fwd" in upper right corner & with part number in lower right
plastic, polyurethane
plastic polyurethane
material to be reticulated foam per SM-Alc specification MS-MMRS-87-100
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Definition Definition of approved item name (AIN): "PLASTIC MATERIAL,CELLULAR"
A bulk material, rectangular in shape, composed of a multitude of individual small cells. It is produced in various lengths, widths, and thicknesses, and may have a finished surface or a rough (natural) surface. It is used for low temperature insulation, buoyancy, and also in the electrical, display, and novelty fields. Excludes core material, cellular, structural; cushioning material, packaging; and insert, packaging.
Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished using boxes fabricated in accordance with astm-d5118, class weather-resistant.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
No special marking.
Packaging Codes
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
9330-01-502-3644 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Identification Codes
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
Material Management Material categorization and source of supply
Defense logistics agency, enterprise business systems
A-10 specialized close support aircraft
Material Codes
SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.
SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.
MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.
MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category
IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.
