01-502-4462
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular; right/short edge has 2 cutouts: 1.25WX2.70h at bottom corner & 1.25WX3.66h at top right corner & a crosswise groove:1.25WX1.70h along right edge; top edge is tapered 0.76 at near side; far side has cutout: 4.10WX7.35HX1.80d in upper right corner (far side up) & lengthwise grooves: 1.68WX1.76d along top edge & 2.70WX1.76d along bottom edge & is marked "up aft" in upper left corner & with part number centered above bottom groove
01-502-4543
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with 2 cutouts on right edge: 1.25WX1.00h, 2.20 & 13.70" from bottom/long edge; right edge also has cutout 1.25 deep from top edge to point 13.70 from top on near surface
01-502-4920
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with 2 cutouts on left/short edge: 2.04WX4.00h at bottom corner & 1.25WX1.32h, 2.20" from top; bottom edge tapers 0.36 on far side
01-502-4924
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with 2 cutouts on left/short edge: 1.25WX1.20h, 2.20 from top & 2.64WX4.20h at bottom left corner; bottom tapers 0.50 toward far side & has cutout 0.80w, 1.68 from right edge, extending to left edge & following angle of taper; top edge has 2 cutouts: 2.03WX1.25h, 8.53 from right & arch 6.74WX12.30h, 8.13 from left ending in circle with 3.37 radius; far side has lengthwise groove 2.20WX1.68h along top edge & is marked "up" & "aft" on 2 lines in upper left area (far side up)
01-502-4930
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape with chamfered edges
01-502-4933
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape with chamfered edges
01-502-4940
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with 3 cutouts on left edge: 1.12WX1.44h, 1.44 from bottom, 1.12WX1.06h, 7.50 from bottom & 1.12WX1.40h, 12.04 from bottom; top edge tapers 0.65 from far to near side; a 2.50 inch diameter circle punched out, centered 3.50 from left & 5.20 from top with line cut thru from circle to left edge, 5.20 from bottom; near side has 2 lengthwise grooves: 1.10WX1.26d, 6.86 & 13.60 from left; far side has rounded cutout with 7.75 radius, centered 10.62 from left, extending from top edge for 56.40" & has markings: "up" & "aft" in upper left corner (far side up) & with part number in lower left corner
01-502-4972
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with numerous cutouts: one on right/short side: 5.24WX6.80h at top corner; 2 cutouts on left side: 1.25WX2.56h, 1.84 from bottom & 4.70WX11.70h, 4.30 from bottom; near side has rounded cutout at top edge 1.80w with radius of 4.25 centered 5.64 from left (cutoff) edge; far side has lengthwise groove: 2.16WX2.28d along bottom edge & is marked "up" & "aft" at center top (far side up) & with part number centered above bottom groove
01-502-4986
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with 3 cutouts on left/short edge: 1.26WX1.24h, 2.16 from bottom & 3.30WX4.86h, 5.00 from bottom & 4.90WX3.50h, 9.10 from bottom; 2 cutouts on right edge: 2.40WX3.50h, 9.10 from bottom & 4.90WX3.50HX1.08d, 9.10 from bottom; top edge tapers 0.40 from far to near surfaces; far side has crosswise grooves: 2.32WX1.50d along top edge & 2.15WX2.36d along bottom one & lengthwise u-shaped groove beginning 3.60 from left edge & 2.32 from top edge at surface (far side up) , down & to right to 5.60 from left & 1.50 from surfacem horizontal to right 4.00", up to 11.60 fro left, 1.50 from surface, then right 4.06 then perpendicularly up 1.50" then right to edge; far side is marked "up" & "aft" near center top & with part number at center bottom
01-502-5000
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with cutout on right/short edge: 5.50WX2.30h at top corner; w cutouts on left edge:
01-502-5155
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with 2 cutouts on right/short edge: 1.40WX2.40h at top corner & 1.40WX2.24h at bottom corner; 2 cutouts on left edge: 1.26WX1.60h, 2.24 from bottom & 3.00WX3.70h at top corner; top edge has cutout 2.62WX3.70h, 4.10 from right; near side has lengthwise grooves: 3.70WX2.20d along top edge & 2.12WX0.68d along bottom edge & crosswise groove: 1.40WX2.68d along right edge; far side has lengthwise grooves: (far side up) 2.40WX0.68d along top edge & 2.24WX1.00d along bottom edge & cutout: 4.14WX6.32LX2.00d at right bottom corner & is marked "up" & "aft" in upper groove & with part number above lower groove
01-502-5498
Plastic Spiral Wrap Tubing
01-502-5526
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape with various cut-outs
01-502-5528
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with cutout on top/long edge: 3.62WX3.80h, 4.10" from right edge; a cutout in bottom left corner: 2.60WX3.72h; a cutout in upper left corner: 2.60WX3.72h; near side has 2 lengthwise grooves: 2.00WX0.60d along bottom edge & 2.60WX0.60d along top edge; far side is marked: "up" & "aft" on 2 lines near center top edge & with part number approx. 6" from bottom & left edges (far side up)
01-502-5536
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with 2 cutouts on top/short edge: 2.80WX4.00h in right corner & 2.60WX3.70h in left corner; a cutout at bottom left corner: 4.14WX5.30h; far side tapers 0.24 at bottom edge & is marked: "up" & "aft" on 2 lines near center top & part number in bottom left corner
01-502-5553
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is tapered to 15.630 inch length-wise with various cut-outs
01-502-5555
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with cutout on bottom/long edge: 3.60w X4.40h at left corner; 2 cutouts on top edge: 2.60WX3.84h at left corner & 5.70WX4.24h at right corner; near side has 3 crosswise grooves: 1.16WX1.70d, 5.20 & 11.20" from left edge & 3.20WX2.12d along right edge; far side tapers 0.88 at bottom edge & has slanted cutout 5.70w from right edge (near side up) at near surface top edge, slanting down to 1.60 from top edge on far side & a cutout on bottom edge: 10.02WX1.36HX0.88d 5.50 from left & is marked: "up" & "aft" near center top & with part number in lower right area (near side up)
01-502-5559
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is semi-circle in shape with various cut-outs, see drawing for details
01-502-5569
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is tapered to 15.630 length-wise with various cut-outs, see drawing for details
01-502-5573
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with 2 cutouts on bottom/long edge: 1.80WX3.00h at right corner & 4.20WX4.60h at left corner; left edge has cutout: 1.26WX1.40h, 2.20 from top; top edge has 2 cutouts: rectangle, 3.50WX5.75h, 3.50 from right edge & half-arch, 2.00w extending to right of line 3.50 from right edge, ending in arc with 1.00 inch radius, centered 3.00 from right edge & 7.00 from top; near side has groove along top edge: 2.20WX1.50d; far side tapers 0.30 at bottom edge & is marked: "up" & "aft" on 2 lines below top groove, in right corner (far side up) & with part number centered near bottom edge
01-502-5582
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with 2 cutouts on left/short edge: 1.26WX1.40h, 2.20" from bottom edge & 1.26WX1.20h, 10.50 from bottom; near side is marked: "up" & "fwd" on 2 lines near top center & with part number to the right; far side tapers 0.26 inch at bottom & has 2 crosswise grooves: 1.12WX1.12d, 6.92 from right edge (far side up) & 6.10 from left edge
01-502-5591
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with cutout on right/short edge: 1.26WX1.00h, 4.00" from bottom edge; 2 cutouts on left edge: 1.26WX2.50h, 2.50 from bottom & 1.26WX1.40h, 2.08 from top; near side has 2 lengthwise grooves: rectangular, 2.08WX1.40d along top edge & semicircular with 2.00 inch radius centered 6.16 from bottom & 0.70 from near surface; near side is marked: "up" & "fwd" on 2 lines in upper left area (below groove) & with part number to the right; far side is chamfered 45 degrees, 0.50" at bottom edge
01-502-5610
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with arched cutout on right/short edge: 2.05w, 3.40 from bottom, extending from right edge to left, ending in arc with 2.05 inch radius centered 9.75 from right; bottom edge has cutout: 8.79WX1.16HX0.94d, 6.40 from left; left edge has 3 cutouts: 1.26WX1.40h, 2.20 from top & 1.26WX0.78h, 2.72 from bottom & arched cutout with 2.50 radius centered 6.30 from bottom & 3.30 from left, extending to left edge; near side has lengthwise groove: 2.20WX1.40d along top edge & is marked: "up fwd" in upper left area below groove & with part number in top groove near right edge; far side tapers 0.30 at bottom edge & has semicircular lengthwise groove with 2.00 radius centered 6.88 from bottom edge
01-502-5613
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam begins as rectangle with cutout on left/short edge: 5.80WX11.90h at top corner; cutout on right edge: 8.00WX7.50l, 1.20 from bottom with inner corners rounded with 1.00 radius; near side is marked: "up" & "fwd" on 2 lines
01-502-5623
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam begins as rectangle & has 2 cutouts on right/short edge: rectangle, 2.20WX4.18h at top corner & slanted cutout from near side at right edge to far side surface, 2.20" from right edge; a cutout on left edge: 5.80WX9.58h at top corner; near side has lengthwise groove, 4.18WX1.60d along top edge
01-502-5632
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is tapered from right to left length-wise to 1.910 inch, taper is at 66.0 inch radius
01-502-5635
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with 2 cutouts on left/short edge: 1.25WX1.34h, 2.16" from bottom & 1.25WX1.16h, 2.20 from top; a cutout on bottom edge: 7.56WX0.32h, 6.80" from left edge; a circular punchout with 5.00 diameter, centered 9.04 from left & 6.70 from bottom with line cut thru from center of circle to left edge; near side has lengthwise groove: 2.20WX1.36d along top edge & is marked: "up" & "fwd" on 2 lines in upper right area below groove & with part number in lower right corner; far side has lengthwise groove: 2.16WX1.60d along bottom edge & semicircular lengthwise groove with 2.00 radius centered 7.00 from bottom & extending from left edge to right, 9.04"
01-502-5638
Cellular Plastic Material
Used on aircraft, thunderbolt ii, a-10. filler foam rectangular with cutout on top/long edge: 7.80WX2.50h, 9.20" from left edge; 2 cutouts on left edge: 1.35WX1.00h, 2.50 from top & 2.04WX3.60h at bottom corner; cutout on bottom edge: 19.30WX0.80h 1.10 from left edge; a circular punchout with 4.88 inch diameter centered 9.98 from left & 7.04 from bottom; near side has "up"& "fwd" in upper right corner & part number in lower right corner; far side tapers 0.36 at bottom edge (cutout on bottom edge follows this angle)
01-502-5645
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is tapered from left to right width-wise tp 1.910 inch width
01-502-5869
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape with chamferd edges at one end
01-502-5875
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape with chamfered edges at one end
01-502-5888
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape with chamfered edges at one end with one cut-out
01-502-5890
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape with 7.00 inch dia hole centered length-wise at 5.03 inch off the edge
01-502-5907
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape with one 7.00 inch dia hole centered length-wise 5.30 inch from edge
01-502-5933
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape with one 7.00 inch dia hole centered length-wise 5.96 inch from the edge
01-502-6187
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape with one 7.00 inch dia hole located 13.95 by 6.35 inch from edge, see drawing for details
01-502-6188
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape with one chamfered edge, one cut-out
01-502-6190
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape with one chamfered edge, one cut-out
01-502-6197
Cellular Plastic Material
Used on aircraft,thunderbolt ii,a-10. filler foam item is rectangular in shape with two chamfered edges width-wise, one 7.00 inch dia hole centered, see drawing for details
01-502-8339
Observation Window
01-502-9541
Pressure Sensitive Plastic Sheet
Used on 5895-01-461-9786.
01-503-7176
Plastic Molding
Used on 3930-01-486-2151.
01-503-7721
Plastic Strip
01-504-2922
Plastic Molding
Used on 3930-01-486-2151.
01-504-4283
Plastic Strip
Used on seawolf class ssn; regulator - 3 needed. latch bolt bearing strip short ends are rounded with 0.250 inch radius; ends are beveled with radius of 1.50 to width of 0.375-0.376 inch
01-504-5306
Observation Window
01-504-8179
Adhesive Coated Plastic Sheet
Used on aircraft, f-18.
01-504-9501
Observation Window
Used on radar & iff systems; an/spn-35c. 14.400" overall length 3.900" overall width drawing name: window, emc-cast square corners
01-504-9502
Observation Window
Used on radar & iff systems; an/spn-35c. 7.800" overall length 3.400" overall width drawing name: window, emc-cast square corners
01-504-9504
Observation Window
Used on radar & iff systems; an/spn-35c. 11.400" overall length 5.400" overall width drawing name: window, emc-cast square corners
