01-330-1959
Socket Wrench
Plastic surface treated single socket t
01-330-1960
Box Wrench
13.438" overall length 2.840" outside diameter 3/4 nc x 4 1/2 in. lg ferryhead capscrew thru handle oxide surface treated 13 striking
01-330-2748
Flat Tip Screwdriver
Used on used to tighten jack screws on board assemblies/f100-pw0220/229. has a specially modified blade end which consists of a steel disk 0.090in. dia protruding 0.017 in. from tip; serd 6153
01-330-2749
Craftsman's Tweezers
Specially modified by having 2 pins welded on the outside tips
01-330-2750
Mechanical Puller Adapter
Plug-plate 1.25 in. dia x 0.88 in. h
01-330-2751
Mechanical Puller Adapter
Steel tube 1.18 in. dia x 2 in. lg
01-330-3376
Seal Inserter
10.000" overall length
01-330-3377
Seal Inserter
1.500" overall length
01-330-3378
Seal Inserter
7.000" overall length
01-330-3379
Seal Inserter
2.300" overall length
01-330-3381
Leveling-support Jack
Used on an/tpt-t1(v) 6920-01-309-3152 electronic warfare equip.,nonairborne;unmaned threat emitter system. stroke: 15 in. min.; crank revolutions per in. of travel:6 to 12; max. weight: 100 lbs
01-330-3559
Mechanical Puller
Used on cummins series nh, nt, n-855 and n-927 engines.
01-330-3628
Socket Wrench Socket
Used on gse for t-34 engine. 3.0 in. l; 3.0 in. w; 0.30 lbs
01-330-3629
Adjustable Wrench
Used on gse for t-34 engine. 4.0 in. l; 1.5 in. w; 0.5 in. h; 0.20 lbs
01-330-3681
Seal Inserter
2.600" overall length chamfered dia: 0.632 in.
01-330-3771
Electrical Contact Remover
01-330-3776
Torque Wrench Adapter
Used on nsn 2350-01-136-8738,combat tank.
01-330-3822
Electrical Inserter And Remover
Used on mil-c-38999 and mil-c-55302/68 and 69 rear release connectors. plastic; color coded red installing tip, orange removal tip
01-330-3824
Seal Inserter
Used on nsn 1520-01-106-9519,attack helicopter.
01-330-4263
Cross Tip Screwdriver
01-330-4305
Jeweler's Staking Tool
01-330-4851
Torque Wrench Adapter
01-330-4917
Mechanical Puller
An aluminum body with a steel rodthru the center
01-330-4918
Mechanical Puller
An aluminum body with a steel rodthru the center
01-330-4919
Mechanical Puller
A t handled steel rod with a 0.250-28 thread end
01-330-4920
Mechanical Puller
C shaped body with threaded rod trough center; dim.: 3.66 in. lg, 1.60 in. h, 0.75 in. w
01-330-4921
Mechanical Puller
Consists of a steel rod with one end as a t handle
01-330-4922
Mechanical Puller
An aluminum body with a steel rodthru center with a nylon bushing sitting at one end
01-330-4923
Mechanical Puller
An aluminum body with a steel rodthru center with nylon bushing sittingat one end
01-330-4924
Mechanical Puller
An aluminum body with a steel rodthru the center
01-330-4925
Mechanical Puller
An aluminum body with a steel rodthrough center
01-330-6320
Spanner Wrench
7.000" overall length 1.930" outside diameter four pins; 3 in. lg barrel face pin
01-330-6321
Wrench Face Spanner Socket
1.750" overall length 2.374" outside diameter passivate surface treated lug
01-330-6741
Detent Handling Tool
Used on gse for j52 engine. 10.0 in. l; 10.0 in. w; 10.0 in. h; 5.00 lbs
01-330-6742
Detent Handling Tool
Used on gse for j52-engines. 18.0 in. l; 8.0 in. w; 5.0 in. h; 15.0 lbs
01-330-6743
Mechanical Puller
Used on gse for t-34 aircraft. 6.0 in. l; 4.0 in. w; 1.0 in. h; 0.20 lbs
01-330-7754
Torque Wrench Adapter
A cylindrical shaft, 0.80 in. dia, with a plate, 1.20 in. dia, on one end with 4 equally spaced 0.143 in. diapins on a 0.80 bolt circle
01-330-7755
Torque Wrench Adapter
Shaft with larger dia plate one end which has oblong lug protruding 0.260 in. which is inserted into plug
01-330-7756
Torque Wrench Adapter
Used on c130 acft repair equipment.
01-330-7757
Torque Wrench Adapter
01-330-7964
Terminal Hand Crimping Tool
01-330-7965
Pliers
7.500" overall length specially modified by having cylindrical adapters made of laminated plastic bonded to the tips of the pliers; dim.: 0.60 in. lg x .060 in. od
01-330-7966
Mechanical Puller
An aluminum body with a steel rodthru center
01-330-7967
Mechanical Puller
A steel threaded rod with a polytetrafluoroethylene adapter interfacing the part to be removed
01-330-7968
Seal Inserter
9.300" overall length
01-330-7969
Seal Inserter
7.000" overall length
01-330-7970
Seal Inserter
7.000" overall length
01-330-7971
Seal Inserter
3.120" overall length
01-330-8040
C Clamp
End item application stretcher, hydraulic, casters, hospital; cage 2J772; p/n ER3000
01-330-8041
C Clamp
End item application stretcher, hydraulic, casters, hospital; cage 2J772; p/n ER3000
