01-323-7222
Impact Manual Wrench
Used on life preserver.
01-323-8159
Open End Wrench
8.500" overall length
01-323-8918
Electronic Equipm Alignment Tool
01-323-9716
Screw Thread Tang Breakoff Tool
01-323-9722
Screw Thread Insert Inserter
01-323-9982
Socket Wrench
01-323-9983
Socket Wrenc Crowfoot Attachment
01-324-0054
Spanner Wrench
01-324-0055
Spanner Wrench
01-324-0056
Spanner Wrench
01-324-0060
Terminal Hand Crimping Tool
01-324-0063
Mechanical Puller
01-324-0066
Electrical Contact Remover
01-324-0368
Socket Wrench
9.000" overall length
01-324-1335
Hand Hammer
Used during inspection of the bond line of the vertical stabilizer vhf antenna assy on f-16 acft
01-324-2006
Mechanical Puller
01-324-2007
Mechanical Puller
01-324-2665
Seal Inserter
Used on nsn 2330-01-224-9245,low bed trailer.
01-324-2675
Ratchet Wrench
Used on engine model j-85.
01-324-2845
Socket Wrench Adapter
01-324-3152
Torque Wrench
Open end wrench head size 5/16 in.
01-324-3298
Box Wrench
10.000" overall length 0.625" overall width specially designed to hand rotategearbox shaft of position sensor assembly on B1b acft
01-324-3383
Mechanical Finger
3/4 in. square abs plastic; polycarbonate plastic handles
01-324-3970
Mechanical Puller
Used on engine model t700.
01-324-3971
Hand Rivet Set
Used on engine model j52.
01-324-5379
Socket Wrench Socket
Used on transporter,dds.
01-324-5457
Rotating Members Aligning Tool
Used on gear assembly mn red st.
01-324-5697
Electronic Equipm Alignment Tool
Used on an/spg-62a.
01-324-5699
Retaining Ring Installation Tool
Used on cryogenic pump.
01-324-6304
Open End Wrench
Made from snap on pn LTA1416, thickness of wrench modified
01-324-6460
Mechanical Puller
Used on f100/200 acft eng. xdesigned to hook on to the 4th stage turbine vane
01-324-6631
Spanner Wrench
Used on carbine,5.56 mm.(xm4),nsn 1005-01231-0973. 2.145" overall length pin tapers to 0.121 in. dia. by 0.490 in. lg.; pin hardness = rockwell C50-C55; pin steel is aisi 1095; wrench steel is aisi 1045; phosphate is applied after grit blasted; pin not grit blasted phosphate surface treated pin
01-324-6953
Electrical Inserter And Remover
Used on mil-c-81511 series 3 and 4 connectors.
01-324-8662
Adjustable Wrench
Used on gse for av-8b aircraft. contractors nomenclature, wrench, bombrack
01-324-9018
Torque Wrench Adapter
01-324-9019
Torque Wrench Adapter
01-324-9156
Preformed Packing Inserter
01-325-0625
Machinist's Vise
Four 0.275 in. dia mtg holes in base
01-325-0912
Strap Band Hose Clamping Tool
01-325-1577
Screw Extractor
Used on sidearm mk270mod1 container. material plastic abs per mil-m-22544, type iv, color white
01-325-1631
Spanner Wrench
Used on propulsion couplings.
01-325-1632
Socket Wrench Socket
Used on transporter,dds.
01-325-1870
Box Wrench
Wrench stamped out of 11 gage steel oxide surface treated
01-325-1923
Rotating Members Aligning Tool
Used on radar set,an/tpq-37(v)1.
01-325-2473
Spanner Wrench
Used on acft model f-14a.
01-325-2495
Seal Inserter
Used on SH-60F. installation tool, seal threaded shaft with a permanently attached sliding sleeve
01-325-2501
Rotating Members Aligning Tool
Used on aircraft model av-8a/c.
01-325-2598
Bearing And Bushing Remover
Used on engine model j-52.
01-325-3163
Hydraulic Hand Jack
Used on 1730-00-529-6235 maintenance platform.
