6685014627959
Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
6685-01-462-7959 Specification Set by the OEM (see RNCC code 3)
1.350in.
7.000in. ⁓7-1/64"
2.750in.
pacer special
9.0 dc
thermoelectrical circuit
liquid crystal
4
8 push button
carrying case w/handle
-30.0/+85.0 deg celsius and -22.0/+185.0 deg fahrenheit and +0.0/+95.0 percent relative humidity
thermohyromoter; temperature/humidity/dew point indicator
temperature range -22 to +185 deg f, -30 to +85 deg c; temperature accuracy +/- 1.8 deg f (+/-1 deg c) ; humidity range 0 to 95% rh (NON-Condensing) ; humidity accuracy +/-2 percent from 0 to 60 percent rh; +/-3 percent from 61 to 95percent rh; average response time 3 seconds to move 60 percent of scale; calculated dew point range -20 to +120 deg f; -30 to +50 deg c; calculated dew point accuracy +/-2 deg c (+/-3 deg f) from 30 to 95 percent rh; one 9 volt battery; numeral heighth .9in.; stores 16 readings
plastic
comes with one point nist traceable certification of calibration
hand held
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Definition Definition of approved item name (AIN): "HYGROTHERMOMETER,DIGITAL"
An instrument for measuring and indicating by digital display relative humidity and temperature of the surrounding atmosphere. Measurements are made by sensors generally mounted in a probe.
6685-01-462-7959 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Identification Codes
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
Material Management Material categorization and source of supply
Oklahoma city air logistics center 3001 staff drive tinker afb, ok 73145-3303
Miscellaneous aircraft support components
Material Codes
SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.
SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.
MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.
MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category
IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.
