Serving our customers with quality and safety first.
12.000in.
19.000in.
ac
115.0 volts
48.0 hertz and 62.0 hertz
calibrator test station a/M99T-2; nsn 4920-01-102-3757
display function
digital display
4
PT02E-8-2P flowmeter input; UG657/u bnc frequency output; UG657/u bnc fcal input; alpha no. 636 cord set, 300V-Sj type 10 ft
light emitting diode
0.15 percent of flow rate all indicators all scales
single
odisplays in two modes one for MIL-F-5624 in pounds or gallons; in mode 2 for MIL-H-5606 in pounds or gallons; ranges in 0/99999 gallons or 0/999999 pounds; 6 digit l.e.d.; specific gravity 0/0.9999 adjustable by a four digit thumbwheel switch; microprocessor controlled; self diagnostic; initial sensing automatically and statistically averageddedicated use as military aviation fuel and hydraulic fluid transfer standard; to be used with QAF-24 series transmitters rate of flow
7.000in.
An indicator which indicates the rate of flow and consumption of a fluid.
Packing is not required. the unit container shall also serve as the shipping container. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing is not required. the unit container shall also serve as the shipping container. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Reusable container.
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Item does not contain precious metal.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.