NSN 6680-00-171-9490 NIIN 001719490 — Rotating Counter

NSN
Item Name
Assigned
DEMIL
Shelf Life
UOM
Using Services
NSN:
6680-00-171-9490
6680001719490
Description:
COUNTER,ROTATING
NSN Assigned:
01-JAN-63
DEMIL:
NO
Shelf Life:
N/A
UOM:
1 EA
Using Services:
Navy

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

6680-00-171-9490 Specification Set by the OEM (see RNCC code 3)

Overall Length ABHP:

3.187in. ⁓3-3/16"

Overall Height ABKW:

1.459in.

Overall Width ABMK:

1.500in.

Shaft Diameter ABWV:

0.155in. and 0.156in.

Shaft Length ABXF:

0.500in.

Longest Horizontal Distance Between Mounting Centers AFDS:

2.436in.

Longest Vertical Distance Between Mounting Centers AFDV:

0.995in. and 1.000in.

Register Quantity ANQD:

1

Figure Quantity Per Register ANQS:

6 single register single tier

Figure Height ANQT:

0.270in. single register single tier

Shaft Revolutions Per Count ANRD:

0.50 single register single tier

Maximum Count Rate ANRE:

750.0 per minute single register single tier

Mounting Arrangement Style ANRL:

four position square/rectangle

Register Function AXED:

add single register single tier and subtract single register single tier

Actuating Device Location AXEG:

right side single register single tier

Mounting Facility Type And Quantity AXHR:

4 unthreaded hole

Mounting Type For Which Designed BCNX:

panel rear single register single tier

Numeral Display Method CSWS:

drum

Numeral Readout CSWT:

000000 single register single tier and 999999 single register single tier

Shaft Rotation Direction And Maximum Speed In Rpm CSWW:

1500.0 clockwise single register single tier and 1500.0 counterclockwise single register single tier

Special Features FEAT:

nonresettable

Color HUES:

white single register single tier figure

Style Designator STYL:

unenclosed square or rectangular

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
715244-101
Cage Code:
79142
RNCC:
3
RNVC:
2
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
X74903-25
Cage Code:
79142
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
DD1034D
Cage Code:
80249
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
715244-101
Cage Code:
79142
RNCC:
3
RNVC:
2
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
X74903-25
Cage Code:
79142
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
DD1034D
Cage Code:
80249
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
715244-101
Cage Code:
79142
RNCC:
3
RNVC:
2
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
X74903-25
Cage Code:
79142
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
DD1034D
Cage Code:
80249
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
715244-101
Cage Code:
79142
RNCC:
3
RNVC:
2
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
X74903-25
Cage Code:
79142
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
DD1034D
Cage Code:
80249
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
30762
FIIG:
A236A0
Concept No.:
App. Key:
B
Cond. Code:
1
Status:
A
MOUNTING ARRANGEMENT STYLE FOUR POSITION SQUARE/RECTANGLE style nsn 6680-00-171-9490
STYLE DESIGNATOR UNENCLOSED SQUARE OR RECTANGULAR style nsn 6680-00-171-9490

Definition Definition of approved item name (AIN): "COUNTER,ROTATING"

An instrument actuated by means of a rotating shaft and designed to register and total numerically in units proportional to one complete revolution of its shaft. It may have a fixed type mounting or designed to be hand held. See also counter, electrical.

Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims

Pack Size
Pack Weight
Item Weight
Item Dim.
Pack Size:
--
Paclk Weight:
0.0000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

  Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

6680-00-171-9490 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
N
PMIC:
A
ESD:
ESD:
ADPE:
CRITL:
X
Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) A

Item does not contain precious metal.

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

  Identification Codes

HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.

PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Material Management Material categorization and source of supply

SOS
SMIC
MMAC
MCC
SOS:
S9G
SOS:
MMAC:
MCC:
Source of Supply (SOS) S9G

Defense supply center richmond, virginia 23297

  Material Codes

SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.

SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.

MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.

MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category

IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.