Serving our customers with quality and safety first.
solid state unit; mtd on tripod bytribrach w suspended horizontal and vert axes; distance measured by diode emitted infrared modulated light WAVES1 instrument w 3 prism retroreflectors; meas range 10 to 1500 mr; optics one sighting telescope w 7 diameters magnification w cross wire reticle of 3 sec arc p 2 or m 1 sec focusing eye piece; dust proof environment temp thermal equilibrium air m 45 to p 125 deg f; 95 pct humidity at p 68 to p 125porm 2 deg f; solar radiation w/o damage 360 BTU-FT-2 hrs; magnetic FIELDE-W; N-S and vert 3 gauss; 12 v dc btry w reverse polarity protection; internalillumination or tripod mtd theodolite kt; 2nd order 300m; 3rd order 150m; 4th and 5th order 20m, all orders to 1500m accuracy traverse; max time 5 min; RE02 and RE03 MIL-STD-461 electromagnetic interference; calibration provided w/o tools; 15 in. lg, 15 in. w; 12 in. dp mtddim.; max wt 50 lbs w transit and case; winterization kt provided
i type
An electronic instrument utilizing modulated infrared light waves for precise measurements required for surveying, mapping, and artillery operations. It contains instrumentation for direct readout to distances. One instrument and a three (3) prism retroreflector comprise the complete operating assembly. See also surveying instrument, electronic distance measuring microwave.
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Precious metal content is unknown
No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
Represents items with no adp components
The item does not have a critical feature such as tolerance, fit restrictions or application. nuclear hardness properties have not been determined (not valid for input).
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
Us army communications-electronics command and fort monmouth fort monmouth, nj 07703-5016
SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.
SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.
MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.
MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category
IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.