Serving our customers with quality and safety first.
6.0 mm
70.0 mm
50
tube adsorption air sampling 70mm lg 6mm od u/W6665012496657 50s
err default
err default
err default and err default
precision GLASS-Sealed ends; 2 niosh approved sealing caps; precision lockspring; used in various chemical test procedures; niosh and osha approved; method of analysis: gas chromatography; used with sorbent tube holder type a, nsn 6665-01-249-6657, p/n 222-3-1
package
An item designed to be used in conjunction with an electric or manual handheld aspiration pump so as to draw and trap surrounding air vapors. The tube must be chromatographically analyzed, after use, in a laboratory. It does not have an integral indicator or produce colorimetric/color comparative results. It is preferably used in accordance with analytical methods published by the national institute of occupational safty and health administration, environment protection agency, department of health and human services, and/or the environmental protection agency.
Special requirement. see specific instructions or drawings provided.
Special requirement. see specific instructions or drawings provided.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Special requirements.
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.