Physical Properties Testing And Inspection - Supply Class (FSC) 6635

6635-01-444-6944

01-444-6944

Eddy Current Probe

6635-01-444-6945

01-444-6945

Eddy Current Probe

6635-01-444-8000

01-444-8000

Eddy Current Probe

6635-01-444-8001

01-444-8001

Eddy Current Probe

6635-01-444-8002

01-444-8002

Eddy Current Probe

6635-01-444-8003

01-444-8003

Eddy Current Probe

6635-01-444-8004

01-444-8004

Eddy Current Probe

6635-01-444-8016

01-444-8016

Eddy Current Probe

6635-01-444-8267

01-444-8267

Eddy Current Probe

6635-01-444-8271

01-444-8271

Eddy Current Probe

6635-01-444-8653

01-444-8653

Eddy Current Probe

Used on jt8 turbofan engine for support equipment.

6635-01-444-9553

01-444-9553

Physical Reference Standard Set

Used on b-2 bomber. dim. 6.0 in.l by 6 in.w by 1.1 i n. thick; consists of 1.00 in. thick piece of honeycomb core sandwiched by 4piles of ms 558 prepreg glass/epoxy b onded w/MS556 film adhesive; natural finish with single square shaped 0.62 in. by 0.62 in. defect (kapton to laminate disbond) located in the center of the piece

6635-01-444-9556

01-444-9556

Physical Reference Standard Set

Used on b-2 bomber. jdim. 10.5 in square with 1.0 in chamfer at each corner, by approx. 1.25 in. thick; top layerof MSS552 uni-gr/EP0.20 in. thick bonded to 1.0 in. thicksection of core (cels oriented perpendicular to the face sheet)

6635-01-444-9559

01-444-9559

Physical Reference Standard Set

Used on b-2 bomber pacer special. dim. 10.5 in.l by 10.5 in. w by 1.25 in. thick, 3 lbs.; material ms-558 woven gl/ep & ms-220 core; finish natural

6635-01-444-9561

01-444-9561

Physical Reference Standard Set

Used on b-2 bomber pacer special. dim. 10.5 in.l by 10.5 in.w by 1.25 in. thick, weight 3lbs.; material ms-559 woven gr/ep & ms-220 core; finish natural

6635-01-445-0221

01-445-0221

Metal Flaw Electronic Detector

Used on jt8 for support equipment.

6635-01-445-1365

01-445-1365

Industrial X-ray Equipment

Uses both gm

6635-01-445-3607

01-445-3607

Metal Flaw Electronic Detector

Depth 3.0"; height 6.0"; width 10.0"

6635-01-445-5192

01-445-5192

Eddy Current Probe

6635-01-445-5202

01-445-5202

Eddy Current Probe

6635-01-445-5224

01-445-5224

Eddy Current Probe

6635-01-445-5233

01-445-5233

Eddy Current Probe

6635-01-445-5288

01-445-5288

Industrial X-ray Equipment

Geiger-mueller, beta, gamma probe w/sliding 360 deg metal shield for beta discrimination; radiation detected: gamma above 6 kev, beta above 200 kev; 2200 cpm/mr/hr sensitivity; -30 to 75 deg c temp range; 0 to 5 psig pressure range; well is aluminum; 7cm active lg; standard mhv connections; 3.2 cm od; 13.6 cm lg; 125 cm cable

6635-01-445-5289

01-445-5289

Industrial X-ray Equipment

Geiger-mueller alpha, beta, gamma probe w/thin end window; radiation detected: alpha above 4 mev; beta above 70 kev, gamma above 6 kev; 3900 cpm/mr/hr sensitivity; -56 to 85 deg c temp range; 0 to 5 psig pressure range; well is stainless steel; 10.2 cm active lg; 3.34 cm od; 19.1 cm lg; 125 cm cable; standard mhv probe connectiions

6635-01-445-5359

01-445-5359

Material Strength Tester

Gage, rivet blind to inspect blind rivet by applying 150 lbs. pressure load to rivet stem; the unit is positioned on the outer flange of the intermediate case assembly & secured w/4 clamps making sure that the point engages rivet stem & secure

6635-01-445-5804

01-445-5804

Eddy Current Probe

Used on buf; e/i cage 14590, p/n 113650. probe assy. rechii, 0.341 in. dia. tip

6635-01-445-5805

01-445-5805

Eddy Current Probe

6635-01-445-5809

01-445-5809

Eddy Current Probe

6635-01-445-5810

01-445-5810