01-518-1555
Voltmeter
Used on 200 amp electronic ground unit. refer to maintenance manual S9243-by-mma-010; selected red is high-intensity rectangular surface mtg
01-518-1772
Digital Display Indicator
Used on common electronic communication equipment & parts, primary manufacturers.
01-518-1806
Transponder Set Test Set
Used on f/a 18 aircraft.
01-518-1996
Test Probe Attachment
Used on s-3b hats off. 3.270" overall length manufacture name: extended tip; operating voltage: 300 vrms/dc; operating current: 3 amps max.; allows for testing to hard-to-reach points; tip is insulated to the tip.
01-518-2121
Spectrum Analyzer
337.0mm overall width includes option 006-low end range to 30hz
01-518-2508
Special Scale Meter
01-518-2961
Radio Test Set
Used on test set,radio. tests am/fm P25 radios
01-518-2977
Channel Alignment Indicator
Sx data link simulator full-duplex operation; delay generator
01-518-3171
Radar Set Test Bench Set
01-518-3588
Ohmmeter
Used on part of: a0414037-001 megohmmeter panel. analog high resistance megohmmeter standard accessories included: kelvin clip leads, power cord, user manual, calibration cert, shielded test leads, 3a 115 fuse, 3a 230v fuse
01-518-4065
Digital Display Indicator
Used on AV-8B. digital display indicator retrofit
01-518-4225
Special Scale Meter
Used on epcc lpd13. 2.250" overall length 4.350" overall width switchboard style meter model no. hi-Q126; metal housing rectangular flush mtg
01-518-4332
Electronic Systems Test Set
01-518-4336
Electrical Frequency Meter
5003 handheld frequendy counter
01-518-4437
Electronic Altimeter Test Set
Used on trainer aircraft. 420 knot range airspeed; portable, self-contained field tester
01-518-4701
Night Vision Viewer Test Set
01-518-4768
Signal Generator
19.600" overall length 16.800" overall width
01-518-4773
Digital Data Electronic Analyzer
Standalone logic analyzer 102 channels of logic analysis; 2 gb hard drive; 1.44 mb floppy drive; vga color resolution
01-518-5123
Wattmeter
9.562" overall length 5.218" overall width wattmeter includes microprocessor control portable
01-518-5310
Test Lead Set
01-518-5494
Special Scale Meter
Amprobe analog megohmmeter-insulation tester tests insulation of wires, cables, transformers hand-held
01-518-5541
Oscilloscope
13.800" overall length 11.800" overall width w/memory option: 1mpts/ch
01-518-6131
Current Sensor
Used on power meter. 50 ohms impedance; operating temperature zero/50 degrees c
01-518-6278
Signal Generator
17.720" overall length 16.890" overall width includes options: opt 2x-mechanical step attenuator; opt 16-high stability time base; opt 25x-analog modulation suite that includes option 12 (frequency
01-518-6281
Battery Test Set
Mfg name: batter electronics test set (bets)
01-518-6494
Wattmeter
Wattmeter, 60hz, 0-1250 kw scale, poly phase, 2 element, 3 wire, ct ratio 2000:5, pt ratio 460:115
01-518-6569
Electrical Frequency Meter
Meter, frequency, 4 1/2 inch, 250 deg scale, 55-65 hz, 115 vac, crompton meters
01-518-6626
Special Scale Meter
Meter, temperature, selective manual readout, remote 115v, 60hz, 10ohm copper rtd, 0-200 deg. c 4-1/2 inch, 250 deg scale, crompton meters.
01-518-6927
Electrical-electron Plug-in Unit
01-518-7049
Battery Test Set
Used on t-6a training aircraft. 10.250" overall width discharge capacity tester for all types
01-518-7348
Ammeter
Used on for citation and tr-20 cessna aircraft. citation aircraft panel
01-518-7402
Pulse Generator
Calibrator, iff item is a programmable pulsed power source for iff
01-518-7403
Frequency Deviation Analyzer
17.750" overall width auto analyzer option 11 has a 400 hz high pass filter; item has ten readings per second; option 20 has alkaline battery; accesorries included: spare input/output fuses
01-518-7501
Test Set Case
Used on aircraft survivability equipment less the an/apr-39.
01-518-7506
Frequency Calibrator
Used on conductivity sensor, 871ft. 4.000" overall length calibration plug, 2
01-518-7528
Frequency Calibrator
Used on conductivity sensor, 871ft. 4.000" overall length calibration plug 2 plugs into the 871ft sensor port, once plugged-in, enter conductivity to theanalyzer,
01-518-7535
Frequency Calibrator
Used on conductivity sensor, 871ft. 4.000" overall length calibration plug 2 plugs into the 871ft sensor port, once plugged in, enter conductivity to the analyzer,
01-518-7589
Frequency Calibrator
Used on conductivity sensor, 871ft. 4.000" overall length calibration plug 2 plugs into the 871ft sensor port, once plugged in, enter conductivity to the analyzer,
01-518-7598
Frequency Calibrator
Used on conductivity sensor, 871ft. 4.000" overall length calibration plug 2 plugs into the 871ft sensor port, once plugged in, enter conductivity to analyzer,
01-518-7603
Frequency Calibrator
Used on conductivity sesor, 871ft. 4.000" overall length calibration plug 3 plugs into the 871ft sensor port, once plugged in, enter the conductivity to the analyzer, then pull calibrator off the sensor-calibration is complete
01-518-7606
Frequency Calibrator
Used on conductivity sensor, 871ft. 4.000" overall length calibration plug 3 plugs into the 871ft sensor port, once plugged in, enter the conductivity to the analyzer, then pull the calibration plug off-calibration complete
01-518-7616
Frequency Calibrator
Used on conductivity sensor, 871ft. 4.000" overall length calibration plug 3 plugs into the 871ft sensor port, once plugged in, enter conductivity into the analyzer, pull the calibrator off-calibration is complete
01-518-7631
Frequency Calibrator
Used on conductivity sensor, 871ft. 4.000" overall length calibration plug 3 plugs into the 871ft sensor port, once plugged in, enter the conductivity into the analyzer,
01-518-7637
Frequency Calibrator
Used on conductivity sensor, 871ft. 4.000" overall length calibration plug 3 plugs into the 871ft sensor port, once plugged in, enter conductivity to the analyzer, then pull the calibrator off-calibration is complete
01-518-7642
Frequency Calibrator
Used on conductivity sensor, 871ft. 4.000" overall length calibration plug 1 plugs into the 871ft sensor port, once plugged in, enter the conductivity into the analyzer, then unplug the claibrator- calibration is complete
01-518-7646
Frequency Calibrator
Used on conductivity sensor, 871ft. 4.000" overall length calibration plug 1 plugs into the 871ft sensor port, once plugged in, enter the conductvity into the analyzer, then unplug the calibrator-calibration is complete
01-518-7653
Frequency Calibrator
Used on conductivity sensor, 871ft. 4.000" overall length calibration plug 1 plugs into the 871ft sensor port, once plugged in, then enter conductivity to the analyzer, then remove the calibrator-calibration is complete
01-518-7659
Frequency Calibrator
Used on conductivity sensor, 871ft. 4.000" overall length calibration plug 1 plugs into the 871ft sensor port, once plugged in, enter conductivity into the analyzer, remove calibrator- calibration complete
01-518-7679
Test Electronic Syste Controller
Used on advanced boresight equipment (abe) model 310 for apache longbow. system controller (sc)
