01-496-8148
Data Display Group
Used on console, control helm. monitor w/components
01-496-8422
Test Lead
Used on navigational systems. cable assembly, test lead end item: ts-3543a/u, digital data test set
01-496-8439
Oscilloscope
Oscilloscope dso; 2 x 60 mhz, 2 X500 ms/s; compact size
01-496-8441
Special Scale Meter
60 mhz bandwidth; monochrome lcd; 2 digitizers; weight 2 kg
01-496-8442
Ammeter
Measures ac/dc current
01-496-8464
Test Adapter
Dte/dce datacom testing
01-496-8520
Digital Data Electronic Analyzer
Package consists of fireberd 6000, clock recovery, ieee-488 remote control,
01-496-8551
Electrical-electro Accessory Kit
Scc 190 special valve kit includes flukeview software for windows; optically isolated rs-232 cable; hard shell carrying case
01-496-8552
Network Analyzer
10 base-t
01-496-8553
Test Adapter Kit
Multimode fiber test adapter kit includes 2 fiber test adapters; user manual; sc/st patch cords single mode; st/st adapters
01-496-8554
Test Adapter Kit
Single mode fiber test adapter kit includes 2 fiber test adapters; user manual; sc/st patch cords single mode; st/st adapters
01-496-8961
Electronic Digital Reado Counter
Atrigger level
01-496-9150
Ohmmeter
Used on general appliction - test equipment (gen-ap-t). wautoranging megohmmeter; output 250v, 500v, 1000v; resistance 4000 mohms; ac/dc voltage to 600v; auto switching; lo-ohms; backlit lcd; last reading memory, battery life indicator; auto shut off; auto discharge; test leads; 4 c-cells
01-496-9384
Digital Display Indicator
Used on 4r/5r cog items managed by braso. navy - serial remote display display - 1in. tall 6 digit tri-color led; bezel - stainless steel; display window - non-glare glass with silicone seal; sealing - nema 4x gasketing standard; controls - setup menu is accessed via switches located on rear of meter; connections - socketed screw terminal connectors; viewing distance - 50 ft.; operating temperature - -55 deg c - 85 deg c; FA31 = universal remote display; 7 = 18 vdc to 30 vdc; 651 = RS232c serial ascii data
01-496-9399
Ammeter
Used on fixture holding id;01-480-9877. (navy) ammeter, aircraft, material
01-496-9400
Test Lead
Used on fixture assy,holding,interface device niin 01-480-9877. (navy) lead, test, aircraft also used on ammeter, aircraft
01-496-9547
Spectrum Analyzer
Used on 0090579-01(29355), vxi search assy; 1261b-1(21793), vxi-1 chassis; 0090965-1(29355), vxi-1 chassis assy; 0090659-01(29355), vxi search assembly; 1261b-1(21793) acces, vxi-1 chassis; 0090950-1(29355), acess, vxi-1 chassis assy. navy: spectrum analyzer
01-496-9585
Electronic Systems Test Set
Mounts on the fireberds front panel; ability to print results to any printer with the rs-232 port
01-496-9886
Signal Data Converter
Used on an/tsq-179(v)2.
01-496-9892
Test Lead
Used on 9999 ael single mode measurement quality jumpers. st-4 fiber plug, single fiber, length: 1 meter
01-496-9894
Test Lead Set
Used on measurement quality jumpers.
01-496-9895
Test Lead
Used on 9999 ael single mode measurement quality jumpers.
01-496-9896
Test Lead
Used on 6877804-sm(08rc6), singlemode mqj. description: st-31 fiber receptacle. configuration: single fiber (31 ea) . length: 1 meter. end connection description: mil-c-83522/16, mil-t-29504/14 pin terminus, mil-t-29504/15 socket terminus, mil-s-24623/4 splice.
01-496-9897
Test Lead
Used on ael single mode measurement quality jumpers. 8 fiber receptacle
01-496-9904
Test Lead
Used on 6877804-sme (08rc6), single mode enhanced mqj. 4 channel plug to st single mode, 1 meter
01-496-9906
Test Lead
Used on 6877804-sme (08rc6), singlemode enhanced mqj. 4 channel receptacle to st single mode, 1 meter
01-496-9910
Test Lead
Used on 6877804-sme (08rc6), singlemode enhanced mqj. 8 channel receptacle to st single mode, 1 meter
01-496-9911
Test Lead
Used on 9999 ael single mode enhanced mqjs. 31 channel plug to st single mode, 1 meter
01-496-9912
Test Lead
Used on 9999 ael single mode enhanced mqjs. 31 channel receptacle to st single mode, 1 meter
01-496-9913
Test Lead
Used on 6877804-sme (08rc6), singlemode enhanced mqj. 8 channel plug to st single mode, 1 meter
01-496-9936
Current Sensor
Used on cell assy,ref,iccp. 4.000" overall width navy) cell assy, ty-mbt; (drawing) tp-mbt ref cell assy (mbtr) (BW2-1A08906)
01-497-0224
Current Sensor
01-497-1404
Signal Generator
Used on test set instruments. 8.000" overall length 6.100" overall width frequency range 5 hz to 1.2 mhz; output voltage 600 ohm load more than 2.5 v rms, 10 mw, open circuit more than 5.0 v rms; attenuator p 10 to m 70 dbm in 10 db steps plus vernier, accuracy is porm 0.3 db through m 60 dbm range, porm 0.5 db through m 70 dbm range; distortion less than 0.6 pct 5 hz to 30 hz, less than 0.1 pct 30 hz to 100 khz, less than 1 pct 100 khz to 1.2 mhz; balance more than 40 db below 20 khz; input voltage 115 or 230 vac porm 10 pct 48-440 hz; power consumption 7 va; shipping weight 8.0 lb
01-497-1405
Electronic Digital Reado Counter
Used on test set instruments. input 10 hz to 10 mhz; sensitivity min 25 mv rms sine wave 50 hz to 1 mhz, 50 mv rms sine wave 10 hz to 10 mhz; frequency measurement range 10 hz to 10 mhz; gate times manually selected 0.1, 1, or 10 seconds auto position selects gate time within 1 second for resolution; open close totalizing 10 mhz max
01-497-1442
Radio Test Set
Used on an/arm-204a. used to test the arc-164 havequick radios including an enhanced method for measuring am modulation of the tonekey signal from the arc-164
01-497-1762
Probe Subassembly
Used on high speed digitizer.
01-497-1915
Electronic Systems Test Set
Used on tank,combat, full track (m1a1).
01-497-2037
Voltage Standard
01-497-2063
Power-special Purpose E Test Set
Used on hawkeye. vor/ils cable
01-497-2148
Instrument Shunt
Connects into any standard dmm banana connector; features replaceable fuse; no cable required
01-497-2242
Electronic Equip Maintenance Kit
Used on indicator, oil mist, p/n 53561-221.
01-497-2540
Oscilloscope Calibrator
16.800" overall width 9500b/3200 3.2 ghz high-performance oscilloscope calibration workstation can be usd with fluke ieee 488 (gpib) based met/cal automated calibration management software; oscilloscope calibration system is comprised of 9500b/3200 workstation, 4 each of 9530 fast output heads, a 9550 fast acting head, a 9560 activ head, a 9500-4955 dmm calibration interface adapter
01-497-2863
Electrical-electron Test Station
Test
01-497-3013
Electrical-electron Test Station
01-497-3043
Electrical-electron Test Station
Calibration station, on-site support
01-497-3066
Electrical-electron Test Station
Test
01-497-3067
Electrical-electron Test Station
Calibration station, electro fiber optic
01-497-3076
Electrical-electron Test Station
Low frequency test & repair station
