6625015472058
Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
6625-01-547-2058 Specification Set by the OEM (see RNCC code 3)
dc
60.0 mm
195.0 mm
92.0 mm
40.0 hertz and 20000.0 hertz
digital display and bargraph
hand held
blue single indicator all ranges
external
liquid crystal
4-3/4
+1000.0/+1000000.0 ohms single indicator 7th range
switch
autoranging and electrical overload protection and internal battery accommodation
porm 5.0 pct of reading plus 30 digits single indicator 3rd range
5.0 dc
additional electrical characteristics - ac current 0.4 amps at plus or minus (porm) 2.0 pct. of reading plus 10 digits, 10.0 amps at porm 2.5 pct. of reading plus 10 digits; dc current: 10.0 amps at porm 1.5 pct. of reading plus 10 digits; resistance: 10.0 megaohms porm 1.0 pct. of reading plus 10 digits, 40.0 megaohms porm 2.0 pct. of reading plus 10 digits; dc current: 100.0 microamps porm 0.5 pct. of reading plus 10 digits; volts ac: 750.0 volts porm 2.0 pct. of reading plus 10 digits; specifications at plus 23.0 degrees c. porm 5.0 degrees with less than 75.0 pct. relative humidity NON-Condensing; operating temperature 0.0 to 45.0 degrees c. at less than 70.0 pct. relative humidity; storage temperature minus 20.0 to 60.0 degrees c. at 80.0 percent relative humidity with battery removed from meter; altitude 2000.0 meters; weight 450.0 grams
HAND-Held
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Definition Definition of approved item name (AIN): "MULTIMETER"
An instrument which is arranged to measure two or more different electrical quantities (such as volts, amps, and ohms) by means of associated circuits and switches. The value is usually expressed on a single calibrated dial or digital readout display. For items which are connected into a circuit and used chiefly to visually monitor an operation, see meter, multiple scale. See also counter, electronic, digital readout. Excludes bridge (as modified).
Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Packaging Codes
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
6625-01-547-2058 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Identification Codes
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
