6625015252904
Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
6625-01-525-2904 Specification Set by the OEM (see RNCC code 3)
9.0 volts
intellitone 200 toner, 200 probe, coax f connector adapter, 2 RJ11, 2 RJ45 patch cables, test leads with alligator clips, lanyards, owners cd and quick start guide, 2 9 volt batteries
13
fluke corporation
operating
included
multiple item w/carrying case
locate a cable from a distance using radiation; isolate a cable from a bundle using a signal with radiation; validate cable conductor continuity with an automated signal that steps through each conductor
intellitone 200 kit
operating temp 32.0 to 104.0 deg f; storage temp M4.0 to 140.0 deg f; operating relative humidity 95 pct at 50.0 to 95.0 deg f; 75 pct at 95.0 to 104.0 deg f; uncontrolled at less than 50.0 deg f; vibration random 2 g, 5 to 500 hz; shock 1 m drop test with and without module; altitude 3000 m; emc en 61326-1; battery type and life 9 v alkaline, 20 hrs typical; legacy tone create and detect 1000 hz compatible tone; toner dim 5.54 x 2.94 x 1.25 inch; display led; control thumbwheel switch; toner freq intellitone signal encoded digital signal; talk battery voltage 6 v into 600 w; output power 5 v P-P; voltage protection 100 v; auto power down turns off automatically after 2.5 hrs of inactivity; probe dim 8.73 x 1.88 x 1.26 inch; display 8 led indicators, synch led indicator; audio microprocessor controlled audio files; control thumbwheel switch, volume control wheel; tone detection detects intellitone digital signal
1 khz signal from analog toners; auto power down turns off automatically after one hour of inactivity
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Definition Definition of approved item name (AIN): "TEST SET,ELECTRICAL CABLE"
A test set primarily designed for use in making examinations of electrical cables. can be used for locating shorts, crosses, and grounds in electrical cables. this would also permit locating high resistant faults. see also test set (1), power-special purpose electrical cable assembly. excludes reflectometer, metallic time domain.
Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
No special marking.
Packaging Codes
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
6625-01-525-2904 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Identification Codes
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
