6625014678576
Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
6625-01-467-8576 Specification Set by the OEM (see RNCC code 3)
21.000in. ⁓21-1/64"
5.200in.
115.0 volts and 230.0 volts
22.0 volts and 30.0 volts
47.0 hertz and 400.0 hertz
+5.000/+10.000 megahertz
2
5.0 megahertz and 10.0 megahertz
standard
60.000 pounds
rack
not provided
single
acc +/m 7X10-12; settability +/- 3X10-12; operating temp range 0 to 50 deg. c; stability +/- -3X10-12 over the life of the tube; spectral purity >81db for 10mhz and >87 for 5mhz; amplitude 1vrms into 50 ohm load; monitor output is a type d connector; warmup time is 20min for 10mhz and 45min for 5mhz; front panel connectors for 1pps, sync input, zeeman input, rf outputs; operating humidity, 95% up to 50c; option 010 interal standby battery and automatic charger; 018 time code output; 075 8year ceslum beam tube warranty; 099option package including ether 1 mhz or 100 khz and internal tod display with 1ppsadvance/delay
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Definition Definition of approved item name (AIN): "FREQUENCY STANDARD"
An item that can generate a fundamental frequency with a high degree of accuracy. Harmonics of this fundamental are then used as a reference point for checking throughout the radio spectrum. The standard may be stable crystal oscillator, noncrystal oscillator, tuning fork, atomic beam, molecular beam, gas cell, quantum mechanical resonator, or the like.
6625-01-467-8576 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Identification Codes
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
Material Management Material categorization and source of supply
Warner-robins air logistics center 455 byron st robins afb, ga 31098-1860
Airborne communication equipment
Material Codes
SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.
SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.
MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.
MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category
IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.
