Serving our customers with quality and safety first.
ac
8.500in. ⁓8-1/2"
3.500in.
19.000in.
50.0 hertz and 60.0 hertz
used on low level receiver outputs as well as high power pa amplifiers used in most aircraft; AUDIO-Frequency generators, low power amplifiers, transducers, headphones, and microphones
technical manual 1
dial w/pointer
rack
+0.020 to 20.000 kilohertz
external
+0.002 to 200.000 watts single indicator 2nd range
3 binding post
115.0 ac
requested name audio wattmeter; power on, fan on, and temperature warning indicators on the front panel; load switch selects from 12 load impedances that range from 4 ohms to 600 ohms; power switch selects power range from 2 milliwatts to 200 watts FULL-Scale
designed to measure audio power output
t.o. 33A1-12-1358-1; specialized avionics test equipment technical manual
D1 rectangular or square
An instrument which measures one or more different electrical power quantities (such as decibels and watts), and is calibrated using watts. The power measurement and/or calibration may be displayed in multiples and/or submultiples thereof on a dial and/or digital readout display. For items designed to measure radio frequency power see test set, electrical power and meter, multiple scale. Excludes: ammeter; frequency meter; multimeter; voltmeter.
Indicates that the item represented by the nsn in the input/output header is the (physical) item of production in an i&s generic relationship. (the generic master nsn appears in the segment h.) must be used in combination with phrase code s.
OOU: Order of Use. Three position alpha code denoting the interchangeability and substitutability (I&S) relationship of a national stock number within a service/agency I&S family.
JTC: Jump to Code. Three position alpha code that denotes an exception to the normal sequence to be followed in the attrition of items within an interchangeability and substitutability (I&S) family.
Phrase Code: A one position code assigned to a phrase used in the management data list to denote changes and/or relationships between national stock numbers and reference data.
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
Warner-robins air logistics center 455 byron st robins afb, ga 31098-1860
Automatic test equipment/auto test systems
SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.
SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.
MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.
MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category
IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.