NSN 6625-01-102-9777 NIIN 011029777 — Electronic Digital Reado Counter

NSN
Item Name
Assigned
DEMIL
Shelf Life
UOM
Using Services
NSN:
6625-01-102-9777
6625011029777
Description:
COUNTER,ELECTRONIC,DIGITAL READO
NSN Assigned:
01-NOV-80
DEMIL:
 DEMIL
Shelf Life:
N/A
UOM:
1 EA
Using Services:
--

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

6625-01-102-9777 Specification Set by the OEM (see RNCC code 3)

Overall Length ABHP:

18.500in. ⁓18-1/2"

Overall Height ABKW:

3.500in.

Overall Width ABMK:

18.130in.

Current Type ACDC:

ac or dc

Frequency Rating ACZB:

48.0 hertz and 66.0 hertz

Accessory Component Quantity AFHS:

2

Electrical Connection Type AGBD:

bnc

Internal Battery Accommodation ALSF:

not included

Specific Usage Design ALXZ:

designed for AGM-69A, cruise missile

Voltage Rating AMSE:

100.0 volts and 240.0 volts

Electrical Connection Quantity ASKX:

8

Unpackaged Unit Weight AWJN:

18.750 pounds

Mounting Method AXGY:

rack

Accessory Component Name AZCG:

power cord 229 cm; rack flange kit

Measurement Type BFHZ:

frequency and period average and ratio and time interval and totalizing

Frequency Range BFJB:

+0.000/+15.000 megahertz

Accuracy Rating BFJC:

porm 1 count porm time base error

Gate Time BFJF:

0.0001 seconds and 1.0000 seconds

Sensitivity Rating BFJG:

115 millivolts peak to peak

Internal Calibration Feature BFQM:

not included

Display Type BFQN:

led

Display Digit Quantity BFQP:

8

Display Units Indicator BFQQ:

included

Display Positioned Decimal Point BFQR:

not provided

Display Storage Facility BFQS:

included

Remote Control Provisions BFQT:

included

Solid State Feature BFQW:

included

Plug-in Units Provision BFQZ:

not included

Standard Frequency Output Feature BFRB:

not included

Phase FAAZ:

single

Special Features FEAT:

includes HP-1B interface and programmable input controls module; provides time period, pulse width, time interval and frequency measurement capabilities of automatic test system; operating conditions: temp 0 to 50 deg c; 20-80 pct humidity; altitude sea level to 10, 000 ft

Functional Description FTLD:

used to functionally test and fault isolate certain 5-52 electrical/electronic assemblies

Reference Number Differentiating Characteristics ZZZY:

differentiated by reparable parts

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
220-10294-3
Cage Code:
81205
RNCC:
1
RNVC:
3
DAC:
2
RNAAC:
SB
Status:
A
MSDS:
SADC:
Part Number:
5328A-010-011-041-H67-908
Cage Code:
1LQK8
RNCC:
3
RNVC:
3
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
5328A-010-011-041-H67-908
Cage Code:
28480
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
SB
Status:
A
MSDS:
SADC:

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
26835
FIIG:
T297-A
Concept No.:
App. Key:
AA
Cond. Code:
1
Status:
A

Definition Definition of approved item name (AIN): "COUNTER,ELECTRONIC,DIGITAL READO"

An instrument used to count the frequency of recurrent electronic events and display the count on the panel of the instrument in numeric form. May also include facilities for a readout printed on tape. May include facilities for a very accurate output which can be used as a secondary transfer standard. It can be used to measure frequency, period, time interval, phase angle, frequency ratio, and for multiple period averaging. See also counter, electronic, digital and indicator, digital display.

Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims

Pack Size
Pack Weight
Item Weight
Item Dim.
Pack Size:
31.0 X 28.0 X 15.0
Paclk Weight:
38.8000lbs
Item Weight:
19.0000lbs
Item Dim:
019000400180
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
4294967295
OPI:
M
SPI No.:
F000003XF1
SPI Rev.:
SPC Mkg:
00
LVL_A:
LVL_B:
LVL_C:
Procedure Indicator Code (OPI) M

All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.

Special Markings Code (SPC_MKG) 00

No special marking.

  Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

6625-01-102-9777 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
P
PMIC:
A
ESD:
ESD:
ADPE:
0
CRITL:
X
Hazmat (HMIC) P

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Precious Metals (PMIC) A

Item does not contain precious metal.

ADPE 0

Represents items with no adp components

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

  Identification Codes

HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.

PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Material Management Material categorization and source of supply

SOS
SMIC
MMAC
MCC
SOS:
FLZ
SOS:
MMAC:
RH
MCC:
Source of Supply (SOS) FLZ

Warner-robins air logistics center 455 byron st robins afb, ga 31098-1860

Material Management (MMAC) RH

Automatic test equipment/auto test systems

  Material Codes

SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.

SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.

MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.

MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category

IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.