Serving our customers with quality and safety first.
dc
3000.0
4.850in. ⁓4-55/64"
0.143in. and 0.157in.
50 single indicator 2nd range
4.600in. ⁓4-39/64"
cold resistant and heat resistant and shock resistant and vibration resistant
4.125in.
nut 6; washer 6
dial w/pointer
panel
six hole/stud bolt circle
100.0 microamperes
red single indicator 3rd range
-1.5/+1.5 at full scale single indicator all ranges
1.660in.
3.760in.
moving iron vane
white single indicator all ranges
black single indicator all ranges
external
6 screw and 6 unthreaded hole
nonlinear single indicator 3rd range
+1.0/+100.0 arbitrary units single indicator 1st range
terminal
knife edge pointer and zero adjuster
taut band
2 solder lug
above top scale in two locations, beta; bat; b cal; left end bottom scale, ico
steel
paint
conforms to MIL-M-10304
C1 round flush mtg
test set, electronic systems, except specially designed
An instrument which is arranged to measure two or more different electrical quantities (such as volts, amps, and ohms) by means of associated circuits and switches. The value is usually expressed on a single calibrated dial or digital readout display. For items which are connected into a circuit and used chiefly to visually monitor an operation, see meter, multiple scale. See also counter, electronic, digital readout. Excludes bridge (as modified).
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.