Serving our customers with quality and safety first.
15.000in.
20.500in.
115.0 volts
50.0 hertz and 400.0 hertz
test set; cable assy, rf; cable assy, special purpose, elec
1 and 13 and 1
bell aerosystem co
60905-045-1 part no. and 60901-004-17 part no. and 60901-077-1 part no.
not included
aluminum carrying case
single item w/carrying case
measurement of pulse position width and amplitude, measurement of transistor beta and COLLECTOR-Base current
pulse generator, pulse trains /groups/ 2 to 15 pulses, pulse train repetition rate 150 to 425 per second amplitute 0 to 9 volts peak, pulse width 0.2 to 1.0 microsecond, trigger pulse generator, amplitude 15.0 v peak mininum, pulse width 1.0 microsecond repetition, rate 150 to 425 pulse per second, output impedance 50 ohms amplitude 15.0 v peak , pulse width 1.0 microsecond repetition rate 37 to 106 pulses per second, output impedance 50 ohms amplitude 10 v peak , pulse width 1.0 microsecond, repetition rate 150 to 425 pulses per second, output impedance 500 ohms, pulse measurement, 2 pulse trains amplitude sensitivity 30 v peak , pulse width 0.9 porm 0.1 microsecond, repetition rate 150 to 425 pulses per second, position porm 0.1 microsecond, transistor measurement, beta gain 20 to 25, COLLECTOR-Base current 1 to 75 microamperes
single
14.000in.
no. an/GPM-40A type
A test set specifically designed for use in making examinations of a transponder set.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
Method 50 reusable container.
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.