NSN 5990-01-168-6797 NIIN 011686797 — Electrical Resolver

NSN
Item Name
Assigned
DEMIL
Shelf Life
UOM
Using Services
NSN:
5990-01-168-6797
5990011686797
Description:
RESOLVER,ELECTRICAL
NSN Assigned:
21-DEC-83
DEMIL:
NO
Shelf Life:
N/A
UOM:
No qup EA
Using Services:
Navy, Air Force

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

5990-01-168-6797 Specification Set by the OEM (see RNCC code 3)

Body Material AAFZ:

any acceptable

Body Style AAQL:

standard round b

Shoulder Diameter AAVH:

1.3120in.

Pilot Diameter AAVL:

0.5000in.

Overall Length ABHP:

2.1620in. ⁓2-11/64"

Flange Diameter ABKK:

1.4370in.

Flange Thickness ABKU:

0.0930in.

Undercut Width ABPC:

0.0780in.

Shaft Diameter ABWV:

0.1200in. single shaft

Shaft Length ABXF:

0.5000in. single shaft

Body Size AJSL:

15

Rotor Input Voltage Rating In Volts AJSR:

26.0

Frequency In Hertz AJSS:

400.0

Rotor Input Current Rating AJST:

70.0 milliamperes

Rotor Input Electrical Power Rating AJSV:

430.0 milliwatts

Zro Resistance In Ohms AJSW:

80.00

Rotor Dc Resistance In Ohms AJTS:

54.00

Stator Dc Resistance In Ohms AJTT:

9.40

Transformation Ratio Equality In Percent AJTW:

3.0

Phase Shift Angle In Deg AJVF:

7.000 output to input

Maximum Fundamental Null Voltage In Millivolts Per Volt AJVG:

40.00 input

Electrical Error Angular Range In Minutes AJVL:

-12.0/+12.0

Actuator Friction Torque At Minus 55 Deg Celsius AJVS:

21.0 CENTIMETER-Grams

Actuator Friction Torque At Plus 25 Deg Celsius AJVT:

7.0 CENTIMETER-Grams

Alignment Hole Quantity AJVW:

4

Shaft Maximum Radial Play AJWG:

0.0010in.

Shaft End Play AJWH:

0.0003in. and 0.0015in.

Pilot Length AJWQ:

0.0400in.

Shoulder Length AJWR:

0.1320in.

Mounting Surface To Terminal End Distance AJWX:

1.6220in.

Shaft Maximum Runout AJXB:

0.0010in.

Terminal Location CQTM:

rear

Plus J Zro Reactance In Ohms CQXQ:

433.00

Shaft Slot Depth CQZS:

0.0310in. single shaft

Shaft Slot Width CRHN:

0.0310in. single shaft

Shaft Type CRSJ:

round, slotted single shaft

Alignment Hole Depth CRSY:

0.0950in.

Transformation Ratio CSJY:

0.453 stator to rotor

Alignment Hole Bolt Circle Diameter CTCW:

0.8750in.

Shaft End Play Determining Weight CWYF:

8.0 ounces

Terminal Type And Quantity TTQY:

7 wire lead

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
SC5990-0006-1
Cage Code:
10112
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
TX
Status:
A
MSDS:
SADC:
Part Number:
SC5990-0006-1
Cage Code:
12115
RNCC:
3
RNVC:
2
DAC:
A
RNAAC:
TX
Status:
A
MSDS:
SADC:
Part Number:
HSC-15-DS-09/F362
Cage Code:
4H618
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
HSC-15-DS-09/F362
Cage Code:
99932
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
TX
Status:
A
MSDS:
SADC:

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
22966
FIIG:
A07800
Concept No.:
App. Key:
A
Cond. Code:
1
Status:
A
BODY STYLE STANDARD ROUND B style nsn 5990-01-168-6797

Definition Definition of approved item name (AIN): "RESOLVER,ELECTRICAL"

An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also synchro (as modified) and goniometer, electrical. Excludes transolver, electrical and potentiometer sine/cosine electrical resolvers.

Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims

Pack Size
Pack Weight
Item Weight
Item Dim.
Pack Size:
--
Paclk Weight:
0.5000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
M
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
Q
LVL_B:
Q
LVL_C:
U
LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

LVL C Code (LVL_C) U

Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.

Procedure Indicator Code (OPI) M

All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.

Special Markings Code (SPC_MKG) 00

No special marking.

  Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

5990-01-168-6797 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
N
PMIC:
A
ESD:
ESD:
ADPE:
0
CRITL:
X
Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) A

Item does not contain precious metal.

ADPE 0

Represents items with no adp components

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

  Identification Codes

HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.

PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Material Management Material categorization and source of supply

SOS
SMIC
MMAC
MCC
SOS:
SMS
SOS:
MMAC:
EH
MCC:
Source of Supply (SOS) SMS

Defense logistics agency, enterprise business systems

Material Management (MMAC) EH

Electronic components (engineering support at the 88th ose/oss)

  Material Codes

SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.

SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.

MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.

MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category

IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.