NSN 5990-00-928-5655 NIIN 009285655 — Receiver Synchro

NSN
Item Name
Assigned
DEMIL
Shelf Life
UOM
Using Services
NSN:
5990-00-928-5655
5990009285655
Description:
SYNCHRO,RECEIVER
NSN Assigned:
01-MAY-68
DEMIL:
NO
Shelf Life:
N/A
UOM:
1 EA
Using Services:
Navy, Air Force

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

5990-00-928-5655 Specification Set by the OEM (see RNCC code 3)

Body Material AAFZ:

any acceptable

Body Style AAQL:

standard round c

Shoulder Diameter AAVH:

0.9995in. and 1.0000in.

Pilot Diameter AAVL:

0.6245in. and 0.6250in.

Overall Length ABHP:

1.7760in. ⁓1-25/32"

Flange Diameter ABKK:

1.0590in. and 1.0620in.

Flange Thickness ABKU:

0.0900in. and 0.0960in.

Undercut Diameter ABPA:

0.9750in.

Undercut Width ABPC:

0.0500in.

Shaft Diameter ABWV:

0.1190in. front shaft

Shaft Length ABXF:

0.1940in. front shaft

Fragility Factor AFJN:

moderately rugged

Body Size AJSL:

11

Rotor Input Voltage Rating In Volts AJSR:

26.0

Frequency In Hertz AJSS:

400.0

Rotor Input Current Rating AJST:

120.0 milliamperes

Rotor Input Electrical Power Rating AJSV:

600.0 milliwatts

Zro Resistance In Ohms AJSW:

44.00

Zso Resistance In Ohms AJSY:

11.70

Zrs Resistance In Ohms AJTA:

57.00

Rotor Dc Resistance In Ohms AJTS:

16.20 and 19.80

Stator Dc Resistance In Ohms AJTT:

8.37 and 10.23

Phase Shift Angle In Deg AJVF:

4.300 input to output

Pilot Length AJWQ:

0.0590in. and 0.0650in.

Shoulder Length AJWR:

0.0590in. and 0.0650in.

Mounting Surface To Terminal End Distance AJWX:

1.6200in.

Shaft Hole Diameter ALNF:

0.0200in. front shaft

Terminal Location CQTM:

rear

Plus J Zro Reactance In Ohms CQXQ:

243.00

Plus J Zso Reactance In Ohms CRGZ:

40.50

Shaft Tapered End Minor Diameter CRJX:

0.1150in. front shaft

Plus J Zrs Reactance In Ohms CRKL:

28.00

Shaft Type CRSJ:

round, tapered, hollowed front shaft

Transformation Ratio CSJY:

0.440 rotor to stator and 0.468 rotor to stator

Shaft Taper Angle In Deg CSLT:

3.0 front shaft

Shaft Taper Length CWAC:

0.1310in. front shaft and 0.1510in. front shaft

Terminal Type And Quantity TTQY:

5 screw

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
1497519-0000
Cage Code:
96774
RNCC:
1
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
AY1103-17B1
Cage Code:
96774
RNCC:
3
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
1497519-0000
Cage Code:
55972
RNCC:
5
RNVC:
9
DAC:
1
RNAAC:
KE
Status:
A
MSDS:
SADC:
Part Number:
AY1103-17B1
Cage Code:
55972
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
KE
Status:
A
MSDS:
SADC:

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
02072
FIIG:
A07800
Concept No.:
1
App. Key:
F
Cond. Code:
1
Status:
A
BODY STYLE STANDARD ROUND C style nsn 5990-00-928-5655

Definition Definition of approved item name (AIN): "SYNCHRO,RECEIVER"

A synchro consisting of a stator and rotor inductively coupled. The rotor is free to turn in accordance with the electrical input from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, variable transformers, or items with dials.

Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims

Pack Size
Pack Weight
Item Weight
Item Dim.
Pack Size:
--
Paclk Weight:
0.1000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
M
SPI No.:
SPI Rev.:
SPC Mkg:
39
LVL_A:
E
LVL_B:
Q
LVL_C:
U
LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

LVL C Code (LVL_C) U

Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.

Procedure Indicator Code (OPI) M

All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.

Special Markings Code (SPC_MKG) 39

Esd sensitive electronic device requirements of mil-std-129 apply.

  Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

5990-00-928-5655 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
N
PMIC:
A
ESD:
ESD:
ADPE:
0
CRITL:
X
Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) A

Item does not contain precious metal.

ADPE 0

Represents items with no adp components

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

  Identification Codes

HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.

PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Material Management Material categorization and source of supply

SOS
SMIC
MMAC
MCC
SOS:
SMS
SOS:
MMAC:
EH
MCC:
SOS:
SMS
SOS:
DH
MMAC:
MCC:
Source of Supply (SOS) SMS

Defense logistics agency, enterprise business systems

Material Management (MMAC) EH

Electronic components (engineering support at the 88th ose/oss)

Special Material (SMIC) DH

Helicopters (h3)

  Material Codes

SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.

SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.

MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.

MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category

IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.

Solicitation History DLA solicitations for NSN 5990-00-928-5655

Solicitation
Ends
Qty
AMSC
Buyer
PR
SMB
Solicitation:
SPE4A517Q1251
End Date:
04/17/2017
Qty:
13 Ea
AMSC:
L
Buyer Code:
PARAC
PR:
0066822458
SMB:
0%