5985015606223
Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
5985-01-560-6223 Specification Set by the OEM (see RNCC code 3)
11.00in. ⁓11-1/64"
250.0 megahertz and 325.00 megahertz single antenna element
1.0in. ⁓1/64"
-32.0 to 49.0 deg celsius
1290-01-536-0128 munition network co XM7 spider
bnc single antenna element
2.0 watts average single antenna element
50.0 single antenna element
1.0 single antenna element
antenna, mcu
operating frequency will transmit and receive in the 250-325Mhz uhf band
requirements:operational fragility:antenna shall withstand 5 foot drop and FREE-Fall drop of 36" onto concrete, antenna shall operate after being immersed in 1 meter of water between 7 and 27 degreesc for 1hr, antenna shall withstand rain of 1.8"/hr for 40 minutes, 0.25" ice, 20.0mm falling snow, 40, 000 feet altitude, 48hr exposure to salt fog and spray with concentration of 5% weight, 30 minutes exposure to sand blown at velocity of 20mph, 44mph wind for 15 minutes, antenna shall be operable by operators wearing mopp level 4 for nbc exposure, antenna shall endure solar radiation of 1120 w/m (squared) , fungus and thermal shock when subjected changes from -35F to 70f / 15min and from 120 to 70f/15min, ultra violet radiation exposure for 2yrs (30 days x 24 deployments)
NON-Operating temperature: -46C to 71c with relative humidity ranges from 5 to 95 percent and includes conditions of mist and / or fog
height of base: 1.58" max
05047-asme Y14.5M-1994 professional/industrial association standard
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Definition Definition of approved item name (AIN): "ANTENNA"
An item consisting of a conductor or a system of conductors specifically designed to radiate and/or receive electromagnetic waves in free space. May include beam-forming devices, drive motors, synchros, radome, and associated mechanical structure.
Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Packaging Codes
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
5985-01-560-6223 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Identification Codes
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
