not establishednot established
1.312in. single mounting facility single center GROUP1.312in. single mounting facility single center group
1.438in. single mounting facility single center GROUP1.438in. single mounting facility single center group
380.0 hertz single component and 380.0 hertz single component and 420.0 hertz single COMPONENT420.0 hertz single component
single phase to single phase single componentsingle phase to single phase single component
internal shield grounded to inclosure single componentinternal shield grounded to inclosure single component
hermetically sealedhermetically sealed
4 single GROUP4 single group
threaded stud single groupthreaded stud single group
1 primary single component and 1 primary single component and 4 secondary single COMPONENT4 secondary single component
32 single GROUP32 single group
0.164in. single GROUP0.164in. single group ⁓11/64"
9.0 milliamperes ac single component 3rd secondary
8.00 ac volts single component 2nd SECONDARY6.30 ac volts single component 1st secondary
unc single group
11 tab, solder lug
A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. Excludes transformer (1), pulse.
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
No special type of cargo code applicable.
Transformer, (machinery and parts),(less than 35 feet).
Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
NAIC: North American Industry Classification. Classifies items and business activity for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy.
SITC: Standard International Trade Classification.
NMFC: National motor freight classification. A six position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on truckloads vs. less than truckload.
UFC: Universal freight classification. a five position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on carload vs. less than carload.
LTL: Less than a truckload rating.
LCL: Less than a carload rating.
WCC: Water commodity code. A three position code that indicates all shipments via water.
TCC: Type of Cargo Code. A one position code for all shipments via water to identify the type of cargo included within the shipment unit.
SHC: Special Handling Code. A one position code for all shipments via water to identify the exception handling required for cargo included within the shipment unit
ADC: Air Dimension Code. A one position alpha code that identifies dimensional characteristics of air shipments by relating the length, width, or height dimensions of the largest piece to the minimum size cargo door opening of an aircraft
ACC: Air Commodity Code. A one position code for all shipments via air to identify material for manifesting and customs requirements
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Precious metal content is unknown
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
Defense supply center columbus, columbus, oh 43218
SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.
SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.
MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.
MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category
IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.