Serving our customers with quality and safety first.
0.156in.
strip type
6
0.750in.
0.375in.
solid construction
4.500in.
3.000in.
0.250in.
0.250in.
9.500in.
3.500in.
0.090in.
stabilator/sas test unit
6 unthreaded hole
MULTI-Row
component board, stabilator/sas test unit
M1 column of terminals along left edge (see marking for spacing) , 6 rows of 3 terminals centered, 0.38, 0.76, and 4.18in. above bottom mounting holes, and 0.38, 0.76 and 4.18in. above middle mounting holes
with short end up, on front: "cr designator" across top edge, letters "a b c d" equally spaced above first row of terminals, "A3" centered along bottom edge, and numerals from 22 to 12 in descending order from bottom edge up, along left edge, beginning 0.38 inch above bottom mounting hole and spaced 0.38 inch apart, and numerals from 11 TO1 in descending order from 0.38 inch above left, center mounting hole to top edge, spaced 0.38 inch apart; on back: "terminal desig" across top edge and letters "e f g h" equally spaced across first row of terminals
glass fiber board and plastic epoxy board
MIL-P-18177. type gee mil spec single material response board
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as fuseholder; holder, resistor; fanning strip; contact assembly, electrical; jack assembly, tip; chamber, cable terminal; panel (2) (as modified); connector (as modified). Excludes terminal, stud; terminal, feedthru, insulated; post, binding, electrical; and chassis, electrical-electronic equipment. For items having printed electrical conductor paths, see printed wiring board.
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Item does not contain precious metal.
No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.