01-472-5098
Receptacle Electrical Connector
01-472-5186
Electrical Receptacle Qu Adapter
Used on b-1b tds. 1.018" overall length 1.812" overall width o-ring material is silicone; adapter finish is cadmium plate, olive drab over nickel plate; 98ac added to end of part number when safety wire holes are required on locknut only
01-472-5244
Electrical Connector Backshell
Used on 5895-01-446-4137, satellite communications control central. 3.750" overall length 1.150" overall width finish 1000 hour salt spray resistant cadmium surface treated straight type w/cable clamp
01-472-5278
Receptacle Electrical Connector
Used on sea knight helicopter h-46. 1.359" overall length
01-472-5324
Receptacle Electrical Connector
Used on 2320-01-354-3382, chassis, truck. 2a thread class right-hand 42.2mm overall length 36.5mm overall width material is thermoplastic; AFQJLA32.5 unef thread series
01-472-5325
Receptacle Electrical Connector
Used on ALQ172. 1.350" overall length 3.000" overall width d shaped connector
01-472-5330
Plug Electrical Connector
2a thread class right-hand 1.550" overall length 0.250" overall width unc thread series
01-472-5474
Receptacle Electrical Connector
Right-hand 1.838" overall length 0.969" overall width 24 thread quantity per inch
01-472-5477
Receptacle Electrical Connector
2.281" overall length 1.969" overall width
01-472-5626
Electrical Connector Backshell
Used on 5805-01-454-3561, small extension node. 2b thread class right-hand 1.500" overall length 1.719" overall width 18 thread quantity per inch stainless steel hardware shall be passivated cadmium surface treated straight type w/cable clamp unef thread series
01-472-5631
Receptacle Electrical Connector
Used on b-1 aircraft; cwiu sru tps. 2a thread class right-hand 1.190" overall length bnc bulkhead receptacle, isolated from panel, front mount unef thread series
01-472-5648
Electrical Connector Cover
Electrical connection cover nickel surface treated internal bayonet w/chain or rope
01-472-5666
Electrical Connector Backshell
Used on 5805-01-454-3561, small extension nod. 2b thread class right-hand 1.500" overall length 1.188" overall width 24 thread quantity per inch finish is cadmium plate, olive drab, over electroless nickel; stainless steel hardware is passivated cadmium surface treated straight type w/cable clamp unef thread series
01-472-5683
Electrical Connector Backshell
Used on 5805-01-454-3561, small extension nod. 2b thread class right-hand 1.500" overall length 1.281" overall width 18 thread quantity per inch finish is cadmium plate, olive drab, over electroless nickel; stainless steel hardware is passivated; rfi ring furnished cadmium surface treated straight type w/cable clamp unef thread series
01-472-5689
Electrical Connector Backshell
Used on 5805-01-454-3561, small extension nod. 2b thread class right-hand 1.500" overall length 1.094" overall width 20 thread quantity per inch finish is cadmium plate, olive drab, over electroless nickel; stainless steel hardware is passivated cadmium surface treated straight type w/cable clamp unef thread series
01-472-5713
Electrical Connector Backshell
Used on 5805-01-454-3561, small extension nod. 2b thread class right-hand 1.500" overall length 1.500" overall width 18 thread quantity per inch finish is cadmium plate, olive drab, over electroless nickel; stainless steel hardware is passivated; rfi ring furnished cadmium surface treated straight type w/cable clamp unef thread series
01-472-5716
Electrical Connector Backshell
Used on ah-64 helicopter. used as:adapter, electrical connector, emi/rfi, braid sheild, self locking, shrink boot straight type
01-472-5718
Electrical Connector Backshell
Used on ah-64j helicopter. used as: adapter, electrical connector, emi/rfi, braid shield, self locking, shrink boot straight type
01-472-5719
Electrical Connector Backshell
Used on 5805-01-454-3561, small extensiosn nod. 2b thread class right-hand 1.500" overall length 1.094" overall width 24 thread quantity per inch finish is cadmium plate, olive drab, over electroless nickel; stainless steel hardware is passivated cadmium surface treated straight type w/cable clamp unef thread series
01-472-5750
Receptacle Electrical Connector
Used on tornado nose radar.
01-472-5752
Receptacle Electrical Connector
Used on tornado nose radar.
01-472-5753
Receptacle Electrical Connector
Used on tornado nose radar.
01-472-5759
Plug Electrical Connector
Used on 9000 series computers, hewlett-packard co. manuf. stated this is a single ended scsi. 2 active terminated with 50 pin high density connector
01-472-5827
Receptacle Electrical Connector
2a thread class right-hand 1.210" overall length 0.365" overall width 40 thread quantity per inch unc thread series
01-472-5864
Electrical Connector Backshell
Used on 5805-01-454-3561, small extension nod. 2b thread class right-hand 1.500" overall length 1.188" overall width 28 thread quantity per inch cadmium plate, olive drab, over electroless nickel; stainless steel hardware is passivated cadmium surface treated straight type w/cable clamp unef thread series
01-472-5869
Electrical Connector Backshell
Used on 5805-01-454-3561, small extension nod. 2b thread class right-hand 1.500" overall length 1.500" overall width 18 thread quantity per inch finish is cadmium plate, olive drab, over electroless nickel; stainless steel hardware is passivated cadmium surface treated straight type w/cable clamp unef thread series
01-472-5883
Electrical Connector Backshell
Used on 5805-01-454-3561, small extension nod. 2b thread class right-hand 1.094" overall width 20 thread quantity per inch cadmium plate, olive drab, over electroless nickel; stainless steel hardware is passivated; rfi ring furnished cadmium surface treated angle type w/clamp unef thread series
01-472-5966
Plug Electrical Connector
Used on 1660-00-325-2746. 0.830" overall length
01-472-5995
Receptacle Electrical Connector
Used on b-2 bomber. 31.5mm overall length 28.6mm overall width
01-472-6227
Plug Dummy Connector
01-472-6287
Electrical Connector Jackscrew
Right-hand threaded stud mounted unc thread series
01-472-6317
Receptacle Electrical Connector
Used on antenna. 32.5mm overall length
01-472-6444
Receptacle Electrical Connector
2.592" overall length 1.108" overall width end item aircraft F14a se
01-472-6448
Electrical Connector Backshell
Used on display system replacement (dsr),cip a-01. original name adapter, cable
01-472-6716
Plug Dummy Connector
01-472-6773
Receptacle Electrical Connector
Used on 1430-01-443-5493, hmmwv group. 0.084" overall length 0.092" overall width
01-472-6785
Receptacle Electrical Connector
Used on 1430-01-443-5493, hmmwv group. 0.181" overall length 0.092" overall width
01-472-6794
Receptacle Electrical Connector
Used on 1430-01-443-5493, hmmwv group. 0.284" overall length 0.092" overall width
01-472-6902
Cable Electrical Connector Clamp
Right-hand 1.200" overall length 32 thread quantity per inch double clamping action open frame type
01-472-6904
Plug Electrical Connector
Right-hand 1.838" overall length 24 thread quantity per inch
01-472-6943
Electrical Connector Jackscrew
Used on m-1 abrams tank; 2350-01-436-0005. 2a thread class right-hand 1.420" overall length nha, 12986235, used on M2A3 body mounted unc thread series
01-472-6949
Electrical Connector Backshell
Used on 1520-01-088-3669. 1.485" overall length cadmium surface treated straight shape solid type
01-472-7036
Electrical Connector Bracket
Used on 2350-01-432-1526. 7.120" overall length 5.380" overall width has a panel 90 degrees from main panel for connector attaching irregular
01-472-7087
Electrical Connector Backshell
Used on 1520-01-355-8250. 1.844" overall width cadmium surface treated angle type w/clamp
01-472-7127
Plug Electrical Connector
Used on 5895-01-446-4137, satellite communication control center.
01-472-7137
Electrical Connector Backshell
Right-hand 1.281" overall length cadmium surface treated straight shape solid type iso m thread series
01-472-7158
Receptacle Electrical Connector
Used on ALQ172. 1.415" overall length 0.331" overall width
01-472-7176
Electrical Connector Backshell
Used on 5895-01-446-4137, satellite communication control center. right-hand 1.281" overall length cadmium surface treated straight shape solid type iso m thread series
01-472-7177
Plug Electrical Connector
Used on crane boom. 1.000" overall length
01-472-7213
Electrical Connector Backshell
Used on 4920-01-438-6560. 2.850" overall length 1.200" overall width 3 .020 diameter holes drilled for safety wire cadmium surface treated straight type w/cable clamp
