Serving our customers with quality and safety first.
2a and 2b
RIGHT-Hand
straight type
1.850in. ⁓1-55/64"
0.250in.
0.722in.
vibration resistant and shock resistant and salt water resistant and humidity resistant and thermal shock resistant
0.120in.
1.650in.
coupling facility
1
2 rows of contacts NON-Inserted board single mating end
nonremovable single mating end 1st contact grouping
5.0 single mating end 1st contact grouping
jackscrew
JACKSCREW-Socket
-65.0 deg celsius and 125.0 deg celsius
56
0.086in. ⁓3/32"
back single mating end 1st contact grouping
copper alloy single mating end 1st contact grouping
gold single mating end 1st contact grouping
plastic polyphenylene single mating end and glass single mating end
MIL-G-45204 mil spec single treatment response single mating end 1st contact grouping
zzzy
solder well single mating end 1st contact grouping
QQ-C-530 mil spec single material response single mating end 1st contact grouping
MIL-M-24519, type gst 40-f mil spec all material responses single mating end
29 single mating end 1st contact grouping
round pin single mating end 1st contact grouping
item must comply with requirements of defense supply center columbus production standard no LO4421
contact surfaces gold
0.029 gold grains, troy
gold
unc
breference number differentiating material will be in accordance with naval inventory control point activity hx quality control. manufacturing and testing specifications available at the dla icp.
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly, electrical. For items without inserts, see shell, electrical connector.
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
No special marking.
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item contains gold.
The item is a non-aviation critical safety item (csi) whose failure will result in serious damage to equipment or serious injury or death to personnel.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.