Serving our customers with quality and safety first.
2a
RIGHT-Hand
straight shape, internal coupling
2.234in. and 2.266in. ⁓2-17/64"
1.953in. and 1.985in.
moisture resistant and salt water resistant and vibration resistant
back shell
1
28-8 single mating end
nonremovable single mating end all contact groupings
41.0 single mating end 2nd contact grouping
900.0 single mating end 1st contact grouping
700.0 single mating end 3rd contact grouping
key, multiple key groove
0.0
solid
spring friction
1.438in. ⁓1-29/64"
back single mating end all contact groupings
gold single mating end all contact groupings
plastic diallyl phthalate single mating end
MIL-G-45204 ty 2 cl 2 fed spec single treatment response single mating end all contact groupings
solder well single mating end all contact groupings
aluminum alloy
cadmium and chromate
MIL-M-14, type SDI-30 mil spec single material response single mating end
9 single mating end 3rd contact grouping
round pin single mating end all contact groupings
contact surfaces gold
0.020 gold grains, troy
gold
81349-MIL-C-5015 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
unef
81349-MIL-C-5015 government specification
An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or printed wiring board and is not designed to be mounted on a bulkhead, chasses, panel, printed wiring board, or the like. Excludes jack, telephone; jack, tip; plug, telephone; plug tip; insert, electrical connector; connector body (as modified); and socket, plug-in, electronic components. see also lead assembly, electrical; wiring harness (as modified); and cable assembly (as modified). for items without inserts, see shell, electrical connector.
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item contains gold.
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.