Serving our customers with quality and safety first.
8.000in. ⁓8-1/64"
4.250in.
8.200in.
four 0.257 in. dia holes on 6.000 in. by 7.700 in. mtg centers
remote
through switch contacts
8
25
1
1
feat
design analysis
hardened
An electromagnetically actuated switch having contact wipers which are successively rotated over fixed bank contacts. The contact wipers are progressively advanced over the fixed bank contacts through a repetitive series of stepping operations. The stepping operation may be a continuous forward rotation acting through 360 degrees to return to its normal unoperated position or it may be designed to include an electromagnetic and/or mechanical means for releasing and resetting the switch to its released position for a subsequent operation. The contact wipers may be mechanically held in contact with the fixed bank contacts after the armature of the actuating coil has released. The switch may be released at the end of its travel or at any intermediate position. It includes items designed with two electromagnetic actuators that enable the switch to operate in either direction. For items having the dual function of a switch and a relay assembled together on a common mounting, see relay-switch. For other than electromagnetically actuated switches whose contact wipers are manually rotated over fixed bank contacts, see switch, rotary. Excludes relay, rotary and switch, telephone (as modified).
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Precious metal content is unknown
The item is specifically designed to be or selected as being nuclear hard. in addition the item has other critical features such as tolerance, fit restrictions or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
Defense logistics agency, enterprise business systems
Lgm-30 minuteman
SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.
SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.
MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.
MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category
IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.