5915013723576
Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
5915-01-372-3576 Specification Set by the OEM (see RNCC code 3)
0.900in.
3.940in. and 3.960in.
1.870in.
0.140in.
3.367in. and 3.383in.
2.150in.
+0.0/+70.0 deg celsius
62.5 hercules no.5599.1 pulses per SECOND61.88 hercules no.5599.1 two phase to two PHASE60.94 hercules no.5599.1 two phase to three PHASE60.0 hercules no.5599.1 hertz
50.0 ohms 1st band PASS50.0 ohms 2nd band PASS50.0 ohms 3rd band PASS50.0 ohms 4th band pass
50.0 ohms 1st band PASS50.0 ohms 2nd band PASS50.0 ohms 3rd band PASS50.0 ohms 4th band pass
1.7 1st band PASS1.7 2nd band PASS1.7 3rd band PASS1.7 4th band pass
encased
4 unthreaded hole
gaussian response and active and shock resistant and fungus resistant and moisture resistant and salt water resistant
3.0 1st band PASS3.0 2nd band PASS3.0 3rd band PASS3.0 4th band pass
4 pin input 1st FUNCTION4 pin output 2nd function
metal
59.97 megahertz 1st band pass and 65.04 megahertz 1st band PASS59.97 megahertz 2nd band pass and 63.78 megahertz 2nd band PASS59.98 megahertz 3rd band pass and 61.89 megahertz 3rd band PASS57.14 megahertz 4th band pass and 62.86 megahertz 4th band pass
rectangular terminal/terminals on opposite surfaces
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Definition Definition of approved item name (AIN): "FILTER,BAND PASS"
An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Packaging Codes
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
5915-01-372-3576 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Identification Codes
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
