NSN 5910-01-052-9138 NIIN 010529138 — Fixed Electrolytic Capacitor

NSN
Item Name
Assigned
DEMIL
Shelf Life
UOM
Using Services
NSN:
5910-01-052-9138
5910010529138
Description:
CAPACITOR,FIXED,ELECTROLYTIC
NSN Assigned:
22-DEC-77
DEMIL:
NO
Shelf Life:
N/A
UOM:
1 EA
Using Services:
Navy, Army, Air Force

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

5910-01-052-9138 Specification Set by the OEM (see RNCC code 3)

Body Style AAQL:

w/o mtg facilities, axial terminals

Reliability Indicator AARG:

established

Reliability Failure Rate Level In Percent AARH:

1.0000

Terminal Length ABJT:

1.500in.

Body Diameter ABPM:

0.188in.

Body Length ADAQ:

0.453in.

Terminal Diameter AEBT:

0.025in.

Schematic Diagram Designator AEBZ:

electrode (s) grounded to case

Electrical Polarization AECQ:

nonpolarized

Features Provided CBBL:

hermetically sealed case

Capacitance Value Per Section CQBQ:

33.000 microfarads single section

Nonderated Operating Temp CQJJ:

-55.0 deg celsius and 125.0 deg celsius

Nonderated Continuous Voltage Rating And Type Per Section CQWM:

10.0 dc single section

Tolerance Range Per Section CRTP:

-10.00/+10.00 percent single section

Case Material CWJK:

metal

Capacitive Electrode Material CWNJ:

tantalum

Dissipation Factor At Reference Temp In Percent CWPM:

12.5000

Case Insulation Material CWSZ:

plastic

Special Features FEAT:

sealed in a single silver case

Test Data Document TEST:

98230-0N241721-22 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Terminal Type And Quantity TTQY:

2 uninsulated wire lead

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
0N241721-22
Cage Code:
98230
RNCC:
3
RNVC:
2
DAC:
2
RNAAC:
XP
Status:
A
MSDS:
SADC:

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
00008
FIIG:
A010B0
Concept No.:
1
App. Key:
C
Cond. Code:
1
Status:
A
BODY STYLE W/O MTG FACILITIES, AXIAL TERMINALS style nsn 5910-01-052-9138
SCHEMATIC DIAGRAM DESIGNATOR ELECTRODE(S) GROUNDED TO CASE style nsn 5910-01-052-9138

Definition Definition of approved item name (AIN): "CAPACITOR,FIXED,ELECTROLYTIC"

A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. it may be a single unit, or consist of two or more fixed units which cannot be separated.

Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims

Pack Size
Pack Weight
Item Weight
Item Dim.
Pack Size:
7.2 X 2.9 X 5.4
Paclk Weight:
0.5000lbs
Item Weight:
0.1000lbs
Item Dim:
005700140039
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
M
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
2
LVL_B:
H
LVL_C:
U
LVL A Code (LVL_A) 2

Packing shall be accomplished using cleated plywood boxes, overseas type, conforming to astm-d6251, type iii, class 2, or nailed wood boxes conforming to astm-d6880, class 2, heavy duty.

LVL B Code (LVL_B) H

Packing shall be accomplished using boxes fabricated in accordance with astm-d5118, class weather-resistant.

LVL C Code (LVL_C) U

Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.

Procedure Indicator Code (OPI) M

All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.

Special Markings Code (SPC_MKG) 00

No special marking.

  Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

5910-01-052-9138 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
P
PMIC:
U
ESD:
ESD:
ADPE:
CRITL:
N
Hazmat (HMIC) P

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Precious Metals (PMIC) U

Precious metal content is unknown

Criticality N

The item does not have a critical feature such as tolerance, fit restrictions or application. nuclear hardness properties have not been determined (not valid for input).

  Identification Codes

HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.

PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Material Management Material categorization and source of supply

SOS
SMIC
MMAC
MCC
SOS:
B16
SOS:
MMAC:
CS
MCC:
SOS:
B16
SOS:
MMAC:
MCC:
Source of Supply (SOS) B16

Us army communications-electronics command and fort monmouth fort monmouth, nj 07703-5016

Material Management (MMAC) CS

Communications security (comsec) other than serialized control items

  Material Codes

SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.

SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.

MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.

MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category

IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.