NSN 5905-01-267-3586 NIIN 012673586 — Nonwire Wound Variable Resistor

NSN
Item Name
Assigned
DEMIL
Shelf Life
UOM
Using Services
NSN:
5905-01-267-3586
5905012673586
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
NSN Assigned:
10-NOV-87
DEMIL:
NO
Shelf Life:
N/A
UOM:
1 EA
Using Services:
Navy, Air Force

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

5905-01-267-3586 Specification Set by the OEM (see RNCC code 3)

Section Quantity AAPN:

2

Body Style AAQL:

rectangular bushing mounted

Reliability Indicator AARG:

not established

Shaft Diameter ABWV:

0.249in. and 0.251in.

Shaft Length ABXF:

1.188in. and 1.252in.

Mounting Bushing Length ADAP:

0.234in. and 0.266in.

Body Length ADAQ:

1.031in. and 1.093in.

Body Width ADAT:

0.469in. and 0.531in.

Body Height ADAU:

0.469in. and 0.531in.

Undercut Diameter AEDQ:

0.124in. and 0.126in.

Shaft Style AEDX:

round, stepped

Shaft Bearing Type AEDZ:

bearing

Switch Type AEEA:

rotary

Switch Voltage Rating In Volts AEED:

28.0

Actuator Type AEFD:

single shaft

Effective Electrical Rotation In Deg Angular Rotation AEFH:

235.0 and 245.0

Maximum Starting Torque AEFK:

3.50 INCH-Ounces

Maximum Running Torque AEFL:

3.50 INCH-Ounces

Maximum Stop Torque AEFM:

56.00 INCH-Ounces

Shaft End Play AEFY:

0.020in.

Switch Operating Position AEGH:

start of rotation

Switch Contact Arrangement AEGJ:

single pole, single throw, normally open, both positions maintained

Fragility Factor AFJN:

moderately rugged

Undercut Length AGQL:

0.388in. and 0.452in.

Screw Thread Diameter AJYN:

0.250in.

Screw Thread Series Designator AJYP:

unef

Screw Thread Quantity Per Inch AJYQ:

32.0

Terminal Location APXH:

lower adjacent side two rows

Mounting Method AXGY:

standard bushing

Features Provided CBBL:

humidity proof and switch

Cubic Measure CBME:

0.308 cubicin.

Electrical Resistance Per Section CQCC:

2.5 percent, rated amperes c and better finish

Rotary Actuator Travel In Angular Deg CQCK:

290.0 and 300.0

Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power CQGN:

120.0 all sections

Power Dissipation Rating Per Section In Watts CRGD:

0.5 free air all sections

Resistance Tolerance Per Section In Percent CRSS:

-5.0/+5.0 2nd section

Actuator Travel Control Feature CRSX:

clutch

Ambient Temp In Deg Celsius Per Section At Full Rated Power CSDH:

70.0 all sections

Switch Current Type And Rating In Amps CSDK:

0.125 dc

Standard Taper Curve Per Section CSDL:

a all sections

Terminal Type And Quantity TTQY:

8 tab, solder lug

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
L27075
Cage Code:
7A378
RNCC:
3
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
11188-0031
Cage Code:
27914
RNCC:
3
RNVC:
2
DAC:
A
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
11188-0031
Cage Code:
27914
RNCC:
5
RNVC:
9
DAC:
A
RNAAC:
ZZ
Status:
A
MSDS:
SADC:

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
37405
FIIG:
A002A0
Concept No.:
1
App. Key:
B
Cond. Code:
1
Status:
A
BODY STYLE RECTANGULAR BUSHING MOUNTED style nsn 5905-01-267-3586
BODY STYLE RECTANGULAR BUSHING MOUNTED style nsn 5905-01-267-3586
SHAFT STYLE ROUND, STEPPED style nsn 5905-01-267-3586

Definition Definition of approved item name (AIN): "RESISTOR,VARIABLE,NONWIRE WOUND,"

A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.

Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims

Pack Size
Pack Weight
Item Weight
Item Dim.
Pack Size:
--
Paclk Weight:
0.3000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
M
SPI No.:
SPI Rev.:
SPC Mkg:
ZZ
LVL_A:
Q
LVL_B:
Q
LVL_C:
LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) M

All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.

Special Markings Code (SPC_MKG) ZZ

Special requirements.

  Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

5905-01-267-3586 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
N
PMIC:
A
ESD:
B
ESD:
B
ADPE:
CRITL:
X
Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) A

Item does not contain precious metal.

Electrostatic Discharge (ESD) B

Represents items with esd sensitivity.

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

  Identification Codes

HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.

PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Material Management Material categorization and source of supply

SOS
SMIC
MMAC
MCC
SOS:
SMS
SOS:
MMAC:
EH
MCC:
Source of Supply (SOS) SMS

Defense logistics agency, enterprise business systems

Material Management (MMAC) EH

Electronic components (engineering support at the 88th ose/oss)

  Material Codes

SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.

SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.

MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.

MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category

IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.