Serving our customers with quality and safety first.
1
cylindrical servo mounted
not established
0.6250in.
0.0620in.
2.361in. ⁓2-3/8"
0.781in.
0.0620in.
0.875 centimeters
0.1248in.
0.750in.
1.580in.
1.062in. ⁓1-1/16"
0.8750in.
0.0620 in.
round
ball
single shaft
3600.0
0.40 INCH-Ounces
0.30 INCH-Ounces
96.00 INCH-Ounces
0.003in.
0.001in.
0.003in.
0.0015in.
0.002in.
moderately rugged
radially positioned over less than half the circumference
clamp ring
humidity proof
0.950 cubicin.
20.0 percent, rated amperes c and better flooring
128.57 single section and 257.14 single section and 385.71 single section and 514.29 single section and 642.86 single section and 771.43 single section and 900.0 single section and 1028.57 single section and 1157.14 single section and 1285.71 single section and 1414.29 single section and 1542.86 single section and 1671.43 single section and 1800.0 single section and 1928.57 single section and 2057.14 single section and 2185.71 single section and 2314.29 single section and 2442.86 single section and 2571.43 single section and 2700.0 single section and 2828.57 single section and 2957.14 single section and 3085.71 single section and 3214.29 single section and 3342.86 single section and 3471.43 single section
3600.0
-0.00071/+0.00071 single section
125.0 single section
2.5 7th secondary quality
single section terminal base linearity
27 single section
-2.0/+2.0 deg angular rotation single section
-3.0/+3.0 single section
stops
7 oclock 11th primary
-20.0/+20.0 single section
70.0 single section
shaft has gear, 14 teeth, 127 pitch, 20 deg p.a., 0.1102 in. max dia, full tooth 0.187 to 0.218
terminal surfaces gold
1.200 gold grains, troy
gold
56910-10004-101 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
30 turret
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable, for items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, nonprecision.
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
Special requirements.
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Item contains gold.
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.