NSN 5905-00-006-5480 NIIN 000065480 — Non Wire Wound Variable Resistor

NSN
Item Name
Assigned
DEMIL
Shelf Life
UOM
Using Services
NSN:
5905-00-006-5480
5905000065480
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
NSN Assigned:
23-JUN-72
DEMIL:
NO
Shelf Life:
N/A
UOM:
No qup EA
Using Services:
Navy
Description

Body is rectangular with mounting holes; shaft is round and slotted; terminals are located on the left adjacent side two rows..

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

5905-00-006-5480 Specification Set by the OEM (see RNCC code 3)

Terminal Type And Quantity TTQY:

3 pin

Standard Taper Curve Per Section CSDL:

a single section

Test Data Document TEST:

81349-MILR39015 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type d

Ambient Temperature In Degree Celsius Per Section At Full Rated Power CSDH:

85.0 single section

Resistance Tolerance Per Section In Percent CRSS:

-5 to 5 single section

Power Dissipation Rating Per Section In Watts CRGD:

0.75 free air single section

Length ABHP:

0.555in. ⁓9/16"

Section Quantity AAPN:

1

Reliability Failure Rate Level In Percent AARH:

0.1

Reliability Indicator AARG:

established

Body Style AAQL:

rectangular with mounting holes

Terminal Length ABJT:

0.172in.

Width ABMK:

0.372in.

Height ABKW:

0.5in.

Mounting Hole Diameter ABTB:

0.073in.

Shaft Length ABXF:

0.045in.

Shaft Diameter ABWV:

0.078in.

Body Length ADAQ:

0.5in.

Body Height ADAU:

0.5in.

Mounting Facility Quantity AKPV:

2

Lateral Distance Between Mounting Hole Centers AGTP:

0.52in.

Center To Center Distance Between Terminals AEHT:

0.2in.

Actuator Type AEFD:

single shaft

Body Width ADAT:

0.235in.

Shaft Style AEDX:

round, slotted

Terminal Location APXH:

left adjacent side two rows

Mounting Method AXGY:

terminal

Center To Center Distance Between Terminal Rows AYQR:

0.1in.

Ambient Temperature In Degree Celsius Per Section At Zero Percent Rated Power CQGN:

150 single section

Center To Center Distance Between Center Terminal And Outside Terminal CQCM:

0.1in.

Electrical Resistance Per Section CQCC:

5 kilohms single section

Temperature Coefficient Of Resistance Per Section In Ppm Per Degree Celsius CRFJ:

-50 to 50 single section

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
6R001-01DP09
Cage Code:
19723
RNCC:
C
RNVC:
1
DAC:
5
RNAAC:
TX
Status:
A
MSDS:
SADC:
AF
Part Number:
M39015/2-006PP
Cage Code:
81349
RNCC:
2
RNVC:
2
DAC:
3
RNAAC:
TX
Status:
A
MSDS:
SADC:
Part Number:
MILR39015-2
Cage Code:
81349
RNCC:
4
RNVC:
1
DAC:
3
RNAAC:
TX
Status:
A
MSDS:
SADC:
Part Number:
RTR22DP502P
Cage Code:
81349
RNCC:
5
RNVC:
2
DAC:
3
RNAAC:
9Z
Status:
A
MSDS:
SADC:
Part Number:
M39015-02-006PM
Cage Code:
81349
RNCC:
5
RNVC:
9
DAC:
3
RNAAC:
TX
Status:
A
MSDS:
SADC:
Part Number:
10120170
Cage Code:
A486G
RNCC:
6
RNVC:
9
DAC:
9
RNAAC:
WF
Status:
A
MSDS:
SADC:
Part Number:
5905000065480
Cage Code:
SCY13
RNCC:
5
RNVC:
9
DAC:
9
RNAAC:
YP
Status:
A
MSDS:
SADC:

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
37406
FIIG:
A002A0
Concept No.:
1
App. Key:
A
Cond. Code:
1
Status:
A
BODY STYLE RECTANGULAR W/MOUNTING HOLES style nsn 5905-00-006-5480
SHAFT STYLE ROUND, SLOTTED style nsn 5905-00-006-5480

Definition Definition of approved item name (AIN): "RESISTOR,VARIABLE,WIRE WOUND,NON"

A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.

Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims

Pack Size
Pack Weight
Item Weight
Item Dim.
Pack Size:
--
Paclk Weight:
0.0000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
LVL_A:
Q
LVL_B:
Q
LVL_C:
LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

  Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

5905-00-006-5480 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
N
PMIC:
A
ESD:
ESD:
ADPE:
0
CRITL:
X
Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) A

Item does not contain precious metal.

ADPE 0

Represents items with no adp components

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

  Identification Codes

HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.

PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Material Management Material categorization and source of supply

SOS
SMIC
MMAC
MCC
SOS:
S9E
SOS:
MMAC:
MCC:
Source of Supply (SOS) S9E

Defense supply center columbus, columbus, oh 43218

  Material Codes

SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.

SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.

MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.

MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category

IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.