01-613-4202
Retaining Strap
01-613-4207
Loop Clamp
Used on 2355-01-559-0791. 0.750" overall width 0.032" material thickness -m means clamp, loop is magni coated single loop
01-613-4211
Threaded Spacing Standoff
Used on an/fpn-63. right-hand left internal (includes thru thread) 0.995" thread length 32 left internal (includes thru thread) thread quantity per inch internally threaded full length unc left internal (includes thru thread) thread series
01-613-4213
Threaded Spacing Standoff
Used on an/fpn-63. right-hand left internal (includes thru thread) 0.432" thread length 32 left internal (includes thru thread) thread quantity per inch internally threaded full length unc left internal (includes thru thread) thread series
01-613-4291
Sealing Plug Assembly
01-613-4403
Elastic Strap
01-613-4435
Mounting Bracket
Ngls-m chassis bottom support (TCR014526-01) is constructed from .125 thk 5052-H32 aluminum. manufactured through cuts
01-613-4459
Mounting Bracket
Bracket, solenoid make from 1015-01-205-9658
01-613-4511
Multiple Angle Bracket
Used on f/a-18 e/f. plate, hold down quadruple angle
01-613-4703
Mounting Bracket
Bracket, p-clamp 0.09 inch thick crs
01-613-4992
Mounting Plate
01-613-4993
Mounting Bracket
Used on transmitting set an/spn-41. 1.50" overall length 3.00" overall width stabilator item:strut stabilizer elevation radome (unit 7) .material:
01-613-5028
Mounting Bracket
47.7mm overall width super adjustamount
01-613-5038
Clamping Catch
Retainer, door
01-613-5040
Mounting Bracket
25.4mm overall width toolok
01-613-5071
Manual Control Handle
01-613-5094
Mounting Bracket
Handlelok
01-613-5114
Mounting Bracket
01-613-5127
Protective Dust And Moistur Plug
Used on port steering. plug, stool
01-613-5168
Bail Handle
Used on B-1. recessed pulling handle rectangular swivel
01-613-5215
Lock-release Lever
01-613-5216
Clamping Catch
Secondary catch
01-613-5219
Lock-release Lever
01-613-5222
Mounting Bracket
Used on apu exhaust duct (c-130j). 11.0" overall length 7.580" overall width lower support
01-613-5223
Mounting Bracket
Used on apu exhaust duct (c-130j). lower support
01-613-5240
Mounting Bracket
Ngls-m radio guide (TCR014026-03) is manufactured from a single piece of 6061-T6 aluminum alloy. designed in a squared u-shape with internal beveled edged. attaches the remote control device to the ngls-m audio assembly. six (6) through holes to allow mounting the ngls-m radio guide to the ngls-m audio assembly. painted carc tan 686a. p/o ngls-m audio assembly.
01-613-5268
Resilient General Purpose Mount
Used on nsn 5895-01-564-7999. isolation mount assy round w/bushing four-hole flange
01-613-5285
Protective Dust And Moistu Cover
Used on mrap rg31&route clearance. i/m bracket cover mit/del 38 mt red
01-613-5386
Tie Down Adapter
01-613-5474
Leakproof Seal Plug
Used on mrap rg31&route clearance. 150.0mm overall width seal
01-613-5477
Leakproof Seal Plug
Used on mrap rg31&route clearance. heating plug
01-613-5478
Leakproof Seal Plug
Used on mrap rg31&route clearance. 170.0mm overall length 96.0mm overall width heating plug
01-613-5504
Retaining Clip
Used on mrap rg31&route clearance. emergency steering pump data pack circlip inside width 27.4
01-613-5521
Mounting Bracket
01-613-5534
Dust And Moisture Seal Boot
Used on mrap rg31&route clearance. rubber boot
01-613-5600
Protective Dust And Moisture Cap
01-613-5697
Mounting Bracket
Used on f-22 raptor.
01-613-5704
Loop Clamp
8.38" overall length guide ring assembly two piece
