00-415-1487
Angle Bracket
Cadmium surface treated
00-415-1503
Solid Plain Disk
Passivate surface treated
00-415-1504
Solid Plain Disk
Passivate surface treated
00-415-1505
Solid Plain Disk
Passivate surface treated
00-415-1563
Threaded Spacing Standoff
Left internal
00-415-2146
Loop Clamp
0.500" overall width 0.0285" material thickness lock tab passivate band surface treated single loop
00-415-2228
Lock-release Lever
Paint surface treated
00-415-2231
Bow Handle
6.330" overall length oxide handle surface treated
00-415-3026
Synchro Clamp
0.203" hole diameter four corners rounded 0.190 in. radius; lock leg 0.430 in. radius from a point on 1.010 in. by 0.650 in. center referenced to flat base line; mtg hole on longitudinal center line spaced 0.354 in. from side opposite lock leg passivate surface treated
00-415-3027
Synchro Clamp
00-415-4863
Double Angle Bracket
00-415-4866
Angle Bracket
Angle
00-415-4872
Angle Bracket
Angle
00-415-4873
Retaining Strap
1.905" overall length 0.360" overall width 0.027" material thickness
00-415-5212
Loop Clamp
0.484" overall width 0.059" material thickness offset mount
00-415-5213
Solid Plain Disk
00-415-5214
Catch Strike
0.475" overall length 0.182" overall width
00-415-5295
Loop Clamp
0.900" overall width 0.212" material thickness anodize surface treated
00-415-5313
Angle Bracket
Used on w/s: engine, aircraft, f100-pw-100 (f-15a/b/c/d); engine, aircraft, f100-pw-200 (f-16a/b/c/d); support equipment, c-5 aircraft. angle
00-415-5590
Helical Compression Spring Seat
0.4060" bore diameter not casehardened seat
00-415-5698
Helical Compression Spring Seat
2.2500" bore diameter seat
00-415-6163
Detent Plunger
00-415-6288
Access Cover
0.438" hole diameter enamel surface treated
00-415-6396
Mounting Bracket
Used on uh-1 series helicopters. consists of 6 parts
00-415-6597
Angle Bracket
Angle
00-415-7406
Angle Bracket
Offset angle
00-415-8404
Threaded Spacing Standoff
Projection
00-415-8409
Angle Bracket
Anodize surface treated angle
00-415-8532
Angle Bracket
Angle
00-415-8545
Angle Bracket
Angle
00-415-8808
Angle Bracket
Angle
00-415-8812
Loop Clamp
0.500" overall width 0.064" material thickness passivate band surface treated single loop
00-416-0196
Protective Dust And Moistur Plug
3a thread class
00-416-3914
Loop Clamp
0.750" overall width 0.062" material thickness single loop
00-416-4007
Loop Clamp
0.875" overall width 0.0313" material thickness single loop
00-416-4138
Detent Plunger
00-416-5819
Helical Compression Spring Seat
Used on f-15 aircraft passivate surface treated
00-416-5821
Helical Compression Spr Retainer
Passivate surface treated parallel
00-416-5822
Helical Compression Spr Retainer
Passivate surface treated parallel
00-416-5918
Access Cover
0.184" hole diameter
00-416-6589
Angle Bracket
Passivate surface treated
00-416-6642
Swivel Caster
00-416-8788
Retaining Clip
Pin
00-416-9464
Angle Bracket
Angle
00-416-9469
Synchro Clamp
0.116" hole diameter chromate surface treated
