00-411-9823
Bail Handle
D open
00-411-9859
Turnbuckle Body
3b body thread class left-hand 2.250" thread length anodize surface treated unf body thread series
00-412-0147
Loop Clamp
0.484" overall width 0.051" material thickness single loop
00-412-0154
Access Cover
0.233" hole diameter 6.450" outside diameter design analysis
00-412-0228
Helical Compression Spring Seat
0.1700" bore diameter not casehardened anodize surface treated seat
00-412-0253
Mounting Bracket
Used on tf-30 aircraft engine.
00-412-1074
Drawer Extension Slide
00-412-1207
Access Hole Frame
11.000" overall length 6.062" overall width lacquer surface treated
00-412-1208
Access Hole Frame
00-412-1234
Threaded Rod End
2a thread class right-hand 0.380" rod connection thread length 4.062" overall length unf rod connection thread series
00-412-1384
Mortise Lock Set
Material thickness:1.750 in.thk; case width:4.000 in.; accessory components:removable light filter
00-412-1980
Mounting Bracket
Used on 2350000566808. steel, fed std 66, aisi or sae 1008 to 1025, consists of two 1/2 in. w, 5 in. lg channels welded to opposite ends of 9.880 in. lg, 2 in. w plate, w/two 27/64 in. dia to 3/4 in. dia tapered mtg holes, olive drab enameled finish
00-412-1997
Webbing Strap
Dip plain end of strap to dimension of 0.500 in. porm .120 in. adhesive, epoxy resin, type 1 per mil-a-8623
00-412-2014
Case Corner
1.500" overall width 0.059" material thickness cadmium surface treated three holes
00-412-2340
Catch Strike
3.180" overall length 0.750" overall width 0.250" material thickness
00-412-2451
Flush Catch
Body matl steel; body surface treat. chromate flush lever actuator
00-412-2585
Retaining Strap
3.069" overall length 0.500" overall width 0.040" material thickness passivate surface treated saddle arch
00-412-2586
Retaining Strap
4.786" overall length 0.500" overall width 0.040" material thickness passivate surface treated saddle arch
00-412-2587
Retaining Strap
4.651" overall length 0.500" overall width 0.040" material thickness passivate surface treated saddle arch
00-412-2596
Threaded Spacing Standoff
0.328" right external thread length left internal
00-412-2603
Retaining Strap
2.790" overall length 0.750" overall width 0.051" material thickness anodize surface treated curved arch
00-412-2627
Retaining Strap
3.631" overall length 0.500" overall width 0.040" material thickness passivate surface treated saddle arch
00-412-2685
Rim Latch
Hole diameter:0.250 in.; hole spacing:2.250 in.c to c
00-412-2857
Spring Tension Clip
0.156" hole diameter 0.062" material thickness
00-412-3217
Mounting Bracket
Used on tf-30 aircraft engine.
00-412-3218
Mounting Bracket
Used on tf-30 aircraft engine.
00-412-3219
Double Angle Bracket
Double angle
00-412-3224
Mounting Bracket
Used on tf-30 aircraft engine.
00-412-3225
Angle Bracket
Offset angle
00-412-3229
Mounting Bracket
Used on tf-30 aircraft engine.
00-412-3231
Mounting Bracket
Used on tf-30 aircraft engine.
00-412-3233
Mounting Bracket
Used on tf-30 aircraft engine.
00-412-3238
Angle Bracket
Used on tf-30 aircraft engine. angle
00-412-3246
Double Angle Bracket
Used on tf-30 aircraft engine. adjacent angles
00-412-3253
Mounting Bracket
Used on tf-30 aircraft engine.
00-412-3254
Mounting Bracket
Used on tf-30 aircraft engine.
00-412-3267
Mounting Bracket
Used on tf-30 aircraft engine.
00-412-3293
Access Cover
0.473" hole diameter curve of cover is 85 deg porm 2 deg, has a 0.173/0.179 in. dia hole located 1.880/2.120 in. by 1.880/2.120 in. from the top left or bottom right corner
00-412-4158
Protective Dust And Moistur Plug
00-412-4173
Angle Bracket
Angle
00-412-4174
Resilient General Purpose Mount
Resilient member material: rubber, buna-n
00-412-4654
Threaded Spacing Standoff
Left internal
00-412-5651
Roller Holder
0.375 in. dia; 0.303 in. lg
00-412-5679
Compression Cup
00-412-8236
Spring Tension Clip
00-412-8257
Bridge Clamp
0.812" overall length 0.250" overall width flat
