01-318-4896
Mounting Bracket
01-318-4898
Mounting Bracket
Used on f100pw0229 eng/core. ti alloy; approx. o/a dims 7.040 x 1 in.
01-318-4899
Mounting Bracket
Used on f100pw0229 eng/core mod. ti alloy; 15.528 radius arch by approx. 1.500 in. o/a dims
01-318-4901
Mounting Bracket
Used on A-10A. al alloy per qq-a-250/13 7075; includes p/ns 160D145108-11
01-318-4919
Manual Control Lever
Steel, astm A36, rubber coating, 4.750 in. min
01-318-5203
Metal Grille
2350-01-087-1095
01-318-5204
Access Cover
Used on 2350-01-061-2445;tank cmbt.
01-318-5275
Helical Compression Spring Seat
01-318-5283
Mounting Bracket
01-318-5359
Angle Bracket
Angle
01-318-5370
Access Cover
Anodize surface treated
01-318-5555
Webbing Strap
01-318-5708
Protective Dust And Moisture Cap
01-318-5814
Webbing Strap
01-318-6170
Retaining Strap
2.380" overall length 0.820" overall width 0.060" material thickness u shaped loop 0.938 in. wide o/a; mtg holes placed on line spaced 0.297 in. min 0.327 in. max from edge passivate surface treated curved arch
01-318-6220
Access Cover
Used on an/asq-170 target acquisition designation sight (tads) assembly. 0.108" hole diameter distance of center of first hole to edge is 0.155 in, and mounting holes are spaced at 2.593 in from center to center
01-318-6372
Electronic Equipmen Hardware Kit
01-318-6742
Rod End Connector
01-318-6768
Retaining Strap
01-318-6779
Mending Plate
01-318-6803
Nut And Bolt Retainer
01-318-6810
Spring Tension Clip
01-318-6813
Cushioning Pad
01-318-6821
Helical Compression Spring Seat
01-318-6826
Retaining Seal Plate
01-318-6866
Angle Bracket
Chromate surface treated angle
01-318-6868
Angle Bracket
Primer surface treated angle
01-318-6876
Access Cover
Used on 1260-01-122-5234.
01-318-6877
Access Cover
4.250" inside diameter 10.500" outside diameter 5 holes 0.281 in. dia, 3 holes 0.250-18 npt oxide surface treated
01-318-6878
Access Cover
11.000" outside diameter
01-318-6879
Access Cover
0.281" hole diameter 6.000" outside diameter one additional hole, centrally located, 0.386 in. dia
01-318-6881
Block Clamp
2.380" overall length 0.620" overall width two holes threaded 0.375-16 unc 2b zinc surface treated rectangular
01-318-6887
Door Handle
4.500" overall length free of paint in hole enamel surface treated unc thread series
01-318-6888
Swivel Caster
Swivel offset
01-318-6889
Turnbuckle
Surface, electro-polished, navsea, unc body thread series
01-318-6898
Threaded Spacing Standoff
Projection one end left internal thread
01-318-6901
Threaded Spacing Standoff
Left internal
01-318-6903
Threaded Spacing Standoff
Left internal
01-318-6909
Mounting Plate
01-318-6911
Bumper
0.156" hole diameter
01-318-7217
Mounting Bracket
01-318-7218
Mounting Bracket
