01-318-9187
Mounting Plate
Paint all sides, mil-c-46168, green; two apertures; two additional thru holes, 0.156 in. dia chromate surface treated
01-318-9293
Mounting Bracket
Used on vlantirn targeting pod. item consists of 2 tubes, p/n 717521143-002, that are 1.250 in. long, dia 0.125 in. porm 0.001 in. w/0.028 in. wall porm 0.002 in.
01-318-9372
Rod End Clevis
Used on 6520-00-110-5545. for use on dental chair; mdl. 1005
01-318-9406
Mounting Plate
Used on optical improvement program for target acquisition designation sight. plate, mounting, flat
01-318-9625
Double Angle Bracket
Double angle
01-318-9642
Access Cover
Used on 2350-01-305-0028 m109a3e2. rectangular shape; flat at bottom; top w/cut 2 x 1.130 in. at both corners; two each rectangles w/rounded ends 0.312 in w; 0.563 in. lg.
01-318-9710
Loop Clamp
0.500" overall width 0.032" material thickness rectangular
01-318-9711
Loop Clamp
0.500" overall width 0.026" material thickness offset mount
01-318-9746
Access General Purpose Door
Used on 2350-01-087-1095,m1a1.
01-318-9749
Mounting Bracket
Used on 2350-01-087-1095. item c/o mount-12549964-1; rod- 12549964-3; plate-12549964-2; 4 mountingholes 1.00 dia.; length 6.00 in; width 2.00 in.
01-318-9751
Mounting Bracket
Used on 2350-01-087-1095. length 11.53; width 3.44; 2 mounting holes .312 dia.; 4 attaching holes no.10 (.190) -24 unc unc-2b matl steel, commerical quality .1196 (no.11 msga) thick; material:steel 1015 or 1025 (uns G10150 to G10250) .250 thick
01-318-9766
Manual Control Lever
Used on 2350-01-08701095,xm1a1. material steel alloy 4130 0r 8630; 2 rods welded together; one rod- 12549888-1 is 5.27 in length; 1 rod 12549888-2 is 3.41 in. long
01-318-9775
Bow Handle
3.450" overall length anodize surface treated unc thread series
01-318-9776
Bow Handle
3.780" overall length unf thread series
01-318-9808
Threaded Spacing Standoff
Projection one end left internal thread
01-318-9809
Threaded Spacing Standoff
Left internal
01-318-9852
Solid Plain Disk
01-318-9853
Solid Plain Disk
01-318-9854
Doorstop
Used on abf538 ah1. base width:0.898 in.nom; base diameter:0.660 in.nom; hook/keeper:not included; cadmium surface treated
01-318-9855
Mounting Plate
Used on 4925-01-207-1976. item contains insert p/n MS21209C1-20l; bushing p/n 007263-503; insert p/n MS21209F4-15l; insert p/n MS21209F1-15l
01-318-9857
Drawer Extension Slide Section
Used on missile, mx peacekeeper. right side anodize surface treated
01-318-9858
Drawer Extension Slide Section
Left side anodize surface treated
01-318-9900
Spring Tension Clip
Used on 6530-01-314-1228. tube clip for use on irrigator, surgical; mdl. 203-150 orthotec
01-318-9901
Spring Tension Clip
Used on 6530-01-314-1228. tube clip, left for use on irrigator, surgical; mdl. 203-150 orthtec
01-319-0280
Synchro Clamp
Used on mk200mod0 control,director.
01-319-0319
Electromagnetic Lock
13.3 x 9.0 x 3.125; keyed two sides
01-319-0347
Manual Control Handle
01-319-0499
Mounting Bracket
Used on engine, aircraft, f100-pw-229 (f15e, f16c/d); aircraft, f-16. 1.766" overall length 1.841" overall width third mtg hole 0.281 in. dia., diagnostic unit, upper front
01-319-0500
Mounting Bracket
Steek, comp 1009, astm A366 or astm A569, paint, mil-t-704, ty f; 19.060 in. lg, 14.750 in. w, 4.000 in. h, 0.090 in. thk, 6 holes 0.436 in. min, 0.443 in. max dia, 6.000 in. c to c dist btwn hole along lg, 8.750 in. c to c dist btwn holes along w
01-319-0505
Sealing Plug Assembly
Used on pacer special; w/s: aircraft, hercules c-130; aircraft, b-2 bomber (atb).
01-319-0506
Sealing Plug Assembly
Used on pacer special.
01-319-0576
Protective Dust And Moisture Cap
01-319-0577
Clamping Catch
Used on pacer special.
01-319-0657
Bow Handle
Used on reil-rms equipment.
01-319-0952
Retaining Strap
6.750" overall length 3.000" overall width 0.250" material thickness arch is approx.1.00 in.to 1.25 in.wider than base with an extended end of 1.20 in.wide paint surface treated straight arch
01-319-1012
Drawer Extension Slide
01-319-1022
Mounting Plate
01-319-1023
Mounting Plate
01-319-1131
Angle Bracket
Angle
01-319-1132
Angle Bracket
1st leg has 4 holes, 2 holes have dia 0.276 in. w/0.750 in. dist from edge to hole cntr along width chromate or chromate zinc or enamel surface treated angle
01-319-1133
Double Angle Bracket
Double angle
01-319-1369
Threaded Spacing Standoff
Left internal
01-319-1404
Detent Plunger
Item used on c-141 cowl latch
01-319-1429
Lock-release Lever
Used on operator valve.
