Commercial Hardware - Supply Class (FSC) 5340

01-286-9845

Access Cover

Used on lantirn tgt pod. 0.014" hole diameter item requires 2 tapered guide pins, dia 0.1870 to 0.1872 in. p/n 717513176-002, pins oa lg 0.875 in., chamfered 0.020 in. porm 0.010 in. x 45 deg porm 5 deg & has 0.040 in. porm 0.020 in. spher radius; also requires 16 coarse & f insert screws p/n MS21209C0615 & MS21209C0415

5340-01-286-9865

01-286-9865

Mounting Bracket

Steel, comp 304, aisi; passivate, qq-p-35, type 4; 1.312 in. lg; 1.250 in. w; 0.490 in. min, 0.510 in. max h; three 0.062 in. thk legs; two 0.250 in. lg by 0.203 in. w slots; two 0.250 in. lg by 0.140 in. w slots; irregular shape

5340-01-286-9866

01-286-9866

Mounting Bracket

Consists of one bracket, steel, sae comp 1008 to 1022, 3.038 mm thk, welded to one tube, steel, sae comp 1010 to 1026, 101.6 mm id, 35.0 mm w, 2.1 mm thk

5340-01-286-9868

01-286-9868

Mounting Bracket

Used on lantirn tgt pod. aluminum alloy qq-a-250/11 T651, oa lg 4.774 in.; item requires 4 coarse & f inserts screws, p/n MS21209C0420, 3 coarse & f insert screws p/n MS21209C0615

5340-01-286-9869

01-286-9869

Mounting Bracket

Used on lantirn tgt pod. aluminum alloy, chemical film mil-c-5541 cl 3; oa lg 3.700 in. porm 0.020 in., oa width 2.625 in. porm 0.015 in.; requires 4 component brackets, base-p/n 749651-1, top-p/n 749651-2, table-p/n 749651-3 & portion-p/n 749651-4; also requires 2 self-locking clinch nuts p/n M45938/7-4, mating w/hole dia of 0.213 in. to 0.216 in., 2 self-locking clinch nuts p/n M45938/7-6, 4 press fit terminal standoffs, p/n 40387 mating w/hole dia 0.316 in. porm 0.002 in. thru 0.160 in. to 0.170 in. dia csk 60 deg porm 5 deg opposite side, 3 solid rivets p/n MS20470AD3-3 mating w/hole dia of 0.097 in. to 0.101 in.

5340-01-286-9870

01-286-9870

Mounting Bracket

Used on C-141. comp steel, mil-s-18729, cond n; item has 3 legs, 1st leg lg 0.800 in. cntr section hght 0.800 in., 2nd leg lg 1.300 in., & 3rd leg lg 0.860 in.; leg angles 85 deg, leg widths 0.800 in., dist from edge to hole center along lg & width 0.400 in.; item requires 1 synthetic rubber pad, ams 3207, 0.031 x 1 x 3 in.

5340-01-286-9946

01-286-9946

Access Cover

5340-01-287-0091

01-287-0091

Threaded Spacing Standoff

Collet post

5340-01-287-0172

01-287-0172

Loop Clamp

Offset mount

5340-01-287-0212