01-287-0896
Mounting Bracket
01-287-1076
Helical Compression Spring Seat
01-287-1090
Angle Bracket
Angle
01-287-1200
Access Cover
Used on lantirn tgt pod. zitem requires 6 solid rivets, p/n MS20426AD6-11 csk 100 deg, 1 shroud ballast p/n 717512208-001; item has 47 holes dia 0.165 in. to 0.171 in. csk 100 deg porm 1 deg to a dia of 0.271 in., & is chamfered 0.060 x 45 deg porm 5 deg in 2 pl
01-287-1403
Manual Control Lever
Length 2.645 in:width 0.360 in:thickness 0.060 in:material:A356.0 al aly, per qq-a-601, tem T6; 0.189 in. dia hole in one end; finish:E512 per mil-f-14072; finish:paint per mil-p-23377, method 1, class 2, type 1, color no.17875, per fed-std-595; this investment casting shall conform to mil-c-6021, class 2b, grade d
01-287-1464
Protective Dust And Moisture Cap
01-287-1614
Angle Bracket
Angle
01-287-1808
Mending Plate
01-287-1820
Protective Dust And Moisture Cap
01-287-1856
Access General Purpose Door
01-287-1936
Angle Bracket
01-287-2041
Clamping Catch
0.130" hole diameter zinc catch or cadmium catch surface treated lever
01-287-2174
Detent Plunger
01-287-2206
Threaded Spacing Standoff
3a left external thread class right-hand left external 0.3750" left external thread length 32 left external thread quantity per inch passivate standoff surface treated left internal unc left external thread series
01-287-2345
Access Cover
0.249" hole diameter furnished with one chain; two nuts; one tab; one ring; one cover; rivets as required chromate surface treated
01-287-2425
Retaining Strap
3.690" overall length 0.658" overall width 0.120" material thickness second arch 0.173 in. h by 0.256 in. lg; third arch 0.111 in. h by 0.222 in. lg; two mtg slots 0.300 in. min 0.360 in. max lg by 0.210 in. min 0.230 in. max w; polytetrafluoroethylene impregnated kevlar, A50TF232 cl-a, general electric aircraft engine group triple arch
01-287-2426
Retaining Strap
3.870" overall length 0.485" overall width 0.057" material thickness polytetrafluoroethylene impregnated kevlar, A50TF232 cl-a, general electric aircraft engine group curved arch
01-287-2825
Spring Holder
01-287-2862
Mounting Bracket
Nsteel, corrosion resisting, qq-s-766 comp 302 or comp 304, passivate, GPS20-200 ty 1, cagec 24930; 0.500 in. lg; 0.200 in. w; 0.032 in. thk; two holes 0.119 in. min
01-287-2887
Threaded Spacing Standoff
Post, electrical-mechanical equipment
01-287-2894
Manual Control Handle
01-287-2895
Mounting Bracket
01-287-2998
Loop Clamp
0.500" overall width 0.020" material thickness passivate band surface treated single loop
01-287-3017
Threaded Spacing Standoff
Projection one end left internal thread
01-287-3018
Threaded Spacing Standoff
Projection one end left internal thread
01-287-3019
Threaded Spacing Standoff
Internally threaded full length
01-287-3023
Retaining Strap
01-287-3024
Pawl Fastener
Chromium surface treated
01-287-3240
Protective Dust And Moisture Cap
01-287-3242
Spring Tension Clip
0.032" material thickness paint surface treated
01-287-3257
Access Cover
Used on 1430-01-087-6338.
01-287-3317
Retaining Clip
01-287-3435
Angle Bracket
Used on f404 engine.
01-287-3484
Retaining Clip
01-287-3489
Retaining Strap
