01-207-8578
Angle Bracket
Angle
01-207-8651
Access Cover
Used on f-15 acft.
01-207-8784
Bow Handle
Round
01-207-8865
Spring Tension Clip
0.092" material thickness
01-207-8866
Resilient General Purpose Mount
Passivate outer member surface treated round w/flanged bushing four-hole flange
01-207-9014
Catch Strike
5.000" overall length 2.164" overall width 0.500" material thickness
01-207-9015
Angle Bracket
Angle
01-207-9072
Permanent Magnet
01-207-9123
Rod End Connector
01-207-9203
Angle Bracket
Cadmium surface treated angle
01-207-9293
Mounting Bracket
Used on b-1b se. mfg name support fitting; material, aluminum; mtg holes, 0.813 in.
01-207-9294
Mounting Plate
Used on b-1 se 180 in. launcher. mfg name forward torque plate; steel alloy; 14 in. min, 14.00005 in. max
01-207-9300
Mounting Bracket
Used on b-1b se. mfg name mounting bracket; material aluminum
01-207-9304
Mounting Bracket
Used on b-1b se. ground safety bracket; in min 0.282 in ma
01-207-9462
Angle Bracket
01-207-9714
Manual Control Handle
01-207-9715
Manual Control Handle
01-207-9747
Handwheel
10.000" outside diameter
01-207-9765
Spring Holder
01-207-9766
Threaded Spacing Standoff
One longitudinal edge milled left internal
01-207-9819
Retaining Strap
1.000" overall length 1.120" overall width 0.090" material thickness cadmium surface treated u
01-207-9820
Retaining Strap
3.250" overall length 0.250" overall width 0.063" material thickness arch not centered, starts 0.487 in. from end chromate surface treated straight arch
01-207-9823
Retaining Strap
5.250" overall length 2.500" overall width 0.090" material thickness one center hole 1.750 in. dia; one smaller hole 0.166 in. min, 0.180 in. max dia tapered arch
01-207-9825
Mortise Latch
Face width: 0.310 in.
01-207-9826
Quick Release Plunger
2a thread class right-hand 0.4700" thread length 32 thread quantity per inch unf thread series
01-207-9827
Pawl Fastener
T-handle
01-207-9835
Drawer Extension Slide
Anodize surface treated
01-207-9961
Rigid Caster
No surface finish on aluminum casters; optional height 6.500 in.; optional mounting plate hole spacing 3.000 in. by 3.000 in. rigid
01-208-0095
Mending Plate
19.400" overall length 2.000" overall width 0.012" material thickness 0.375 in. dia. mtg. hole-one, on one end; 0.630 in. lg., 0.500 in. wide other slotted mtg. hole rectangular
01-208-0172
Butt Hinge Leaf
01-208-0252
Retaining Strap
0.156" overall width 0.011" material thickness
01-208-0335
Angle Bracket
2 smaller holes second leg with 0.126 in. min, 0.132 in. max dia anodize surface treated angle
01-208-0470
Handwheel
12.000" outside diameter
01-208-0506
Threaded Spacing Standoff
Left internal
01-208-0535
Nut And Bolt Retainer
01-208-0537
Retaining Strap
2.062" overall length
01-208-0538
Webbing Strap
Color no.34087, fed std 595
01-208-0539
Friction Catch Stud
Passivate surface treated ball, threaded
