01-209-0935
Bow Handle
15.250" overall length anodize surface treated round
01-209-0936
Bow Handle
7.250" overall length
01-209-0937
Bow Handle
2b thread class 8.000" overall length anodize surface treated round
01-209-0948
Threaded Spacing Standoff
Flanged left internal thread
01-209-1110
Bow Handle
4.4375" overall length anodize surface treated round
01-209-1111
Recess Handle
0.063 in. thk
01-209-1112
Handwheel
Right-hand 1.500" inside diameter 8.000" outside diameter 8 thread quantity per inch
01-209-1113
Rod End Connector
2.500 in. lg o/a connector
01-209-1117
Threaded Spacing Standoff
Counterbore 0.690 in. deep projection one end left internal thread
01-209-1137
Nut And Bolt Locking Plate
01-209-1138
Plug Button
Standard
01-209-1139
Retaining Strap
Curved arch
01-209-1141
Helical Compression Spring Seat
Anodize surface treated seat
01-209-1285
Bumper
Round edge on bottom flange
01-209-1341
Angle Bracket
Angle
01-209-1343
Angle Bracket
Passivate surface treated angle
01-209-1636
Protective Dust And Moisture Cap
01-209-1637
Protective Dust And Moisture Cap
01-209-1640
Spring Tension Clip
0.020" material thickness
01-209-1641
Helical Compression Spring Seat
01-209-1669
Threaded Rod End
2a rod end thread class right-hand rod end 3.880" rod end thread length 4.783" overall length external thread, solid end
01-209-1670
Threaded Rod End
2a rod end thread class left-hand rod end 3.880" rod end thread length 4.783" overall length threaded size: NF0.500-20 external thread, solid end
01-209-1787
Angle Bracket
Angle
01-209-2133
Pawl Fastener
Chromium surface treated
01-209-2424
Threaded Rod End
01-209-2527
Double Angle Bracket
Passivate surface treated offset double angle
01-209-2646
Cushioning Pad
Width 0.70 in.; height 0.640 in.; length 0.50 in.; used on ordnance transmission assy
01-209-2858
Angle Bracket
Slots on first leg run parallel to width angle
01-209-2859
Angle Bracket
Angle
01-209-2929
Retaining Strap
1.696" overall length 0.500" overall width 0.040" material thickness rectangular shape passivate surface treated saddle arch
01-209-2973
T Plate
Used on abf156/m99. 1.750" overall length 0.750" overall width 0.250" material thickness tee
01-209-3009
Cushioning Pad
20mm M163A2
01-209-3461
Mounting Bracket
Material:corrosion resistant steel. o/a thickness:0.089 in min to 0.099in max. item has 4 holes with diameterof 0.100 in min to 0.140 in max; holesare countersunk 0.180 in nom by 80 degrees. also has 2 holes:0.100 in min TO0.128 in max. refer to dwg for additional data. end item application:combat tank, XM1. nsn 2350-01-060-2445
01-209-3477
Solid Plain Disk
01-209-3478
Solid Plain Disk
01-209-3709
Mounting Bracket
Bronze castings, alloy 903, cond ascast, spec qq-c-390.alternative material.copper alloy no.923, type 1, ascast, spec qq-c-390; cast sharp corners 0.062 radius, all fillets 0.125 radius unless otherwise specified; let.co.242 drill 2 holes; no.43 0.089 drill; no.4 0.112-40unc-2b; length 1.188"; width 0.938"; legsthickness 0.250"
01-209-3875
Mounting Bracket
Used on aircraft b-1b. alluminum alloy, 6061-T6, qq-a-250/11d; 3.450 in. lg; 1st end 1.640 in. lg from bend to end; 0.265 in. dia to 0.272 in. dia thru; 0.310 in. from end to center of hole; 0.093 in. thk
01-209-3894
Rod End Clevis
01-209-3950
Helical Compression Spring Seat
End is chamfered 0.0200 in. by 45.0 degrees passivate surface treated seat
01-209-4017
Mounting Bracket
12.390" overall length 0.100" overall width item has 5 holes, 0.289/0.296 in. dia; 4 holes 0.227/0.233 in. dia; 2 holes 0.097/0.102 in. dia; csk 100.0 deg/0.193 in. dia
01-209-4046
Spring Holder
01-209-4142
Angle Bracket
Enamel surface treated angle
01-209-4217
Mounting Bracket
Used on lgm-118a. 2.530" overall length item has 2 holes 0.256/0.261 in. dia; 1 hole 0.227/0.233 in. dia; 2 holes 0.097/0.102 in. dia; matl is 0.050 in. thk chromate surface treated
