01-068-2876
Catch Strike
Used on ch47 helicopter,cargo-tr.
01-068-3028
Rim Latch
Used on ch-47d,helicopter,cargo-transport.
01-068-3031
Leakproof Seal Plug
Used on t-63 engine.
01-068-3039
Runner
Used on sentry f22 aircraft. runner metal
01-068-3187
Bow Handle
6.281" overall length anodize surface treated unf thread series
01-068-3188
Bow Handle
4.281" overall length anodize surface treated unf thread series
01-068-3229
Angle Bracket
Anodize surface treated angle
01-068-3230
Double Angle Bracket
Nut mtd on larger dimension leg oxide film surface treated double angle
01-068-3301
Rod End Connector
Connector
01-068-3407
Bow Handle
3.000" overall length
01-068-3562
Swivel Caster
Bright finish, w/brake swivel offset-ball type
01-068-3605
Drawer Extension Slide
Anodize surface treated
01-068-3606
Drawer Extension Slide
Anodize surface treated
01-068-3678
Pad Eye
Used on m60 tank. 1.336" overall length 0.190" overall width rectangular
01-068-3729
Door Handle
1.937" overall length 0.600" overall width
01-068-4053
Mounting Bracket
Used on 2350-00-873-5408 arm recon air assult. fabricate per drawing 12269968; material steel casting class 65-35 spec qq-s-681; for radiator mounting
01-068-4126
Angle Bracket
Angle
01-068-4305
Catch Strike
1.100" overall length 0.750" overall width 0.150" material thickness
01-068-4432
Multiple Angle Bracket
01-068-4543
Shimmy Damper
01-068-4993
Threaded Spacing Standoff
Left internal
01-068-5033
Plug Button
Nickel surface treated standard
01-068-5034
Retaining Band
Pad bonded to strap
01-068-5036
Synchro Clamp
0.140" hole diameter passivate surface treated
01-068-5107
Solid Plain Disk
01-068-5589
Electronic Equipmen Hardware Kit
01-068-5590
Electronic Equipmen Hardware Kit
01-068-5618
Threaded Spacing Standoff
Left internal
01-068-5626
Synchro Clamp
0.213" hole diameter oxide surface treated
01-068-6077
Retaining Strap
Used on container handler. 4.9mm overall length cable ties
01-068-6527
Butt Hinge
14.469" overall length 0.070" material thickness butt
01-068-6528
Handwheel
0.530" overall length 3.530" outside diameter
01-068-6529
Handwheel
0.3750" inside diameter 3.530" outside diameter
01-068-6693
Helical Compression Spr Retainer
Zinc or zinc surface treated parallel
01-068-6707
Retaining Strap
01-068-6709
Loop Clamp
0.500" overall width 0.032" material thickness anodize band surface treated single loop
01-068-6716
Clamp Bolt Assembly
2a thread class 28 thread quantity per inch passivate surface treated knurled no. 2
01-068-6740
Access Cover
0.217" hole diameter itwo each reinforcement beads molded into top of cover dim typical for both beads l 11.500 in.w 0.938 in.protusion h 0.250 in.located from side EDGE2.000 in.to center of bead-end of beadto edge of cover 1.000 in.drain hole-dia 0.147 located lower left hand corner in top; upper end side has a rectangular slot opening-molded rolled flange with 0.125 in.bend radius-protruding 0.188 in.above end surface-dim of opening-w 3.000 in.-d 2.000 in.inside corner rad 0.250 in.located 0.688 in.from right hand side of cover to edge of slot; lower end side has a slot opening-molded rolled flange with 0.125 in.bend radius-protruding 0.188 in.above end surface-dim of opening w 1.750 in.depth 1.875 in.to an inside end radius of slot 0.875 in.slot located 2.938 in.from right hand side of cover to edge of slot; upper right hand side of cover has a slot opening located 0.438 in.fromedge of slot to top edge of cover-dim of slot w 1.188 in.d 2.375 in.with inside corner rad 0.250 in.
01-068-6949
Mortise Latch
01-068-7644
Butt Hinge
0.060" material thickness butt
01-068-7725
Clamping Catch
Mold line radius 26.40 in, mold line level angle 0 degrees anodize handle surface treated
01-068-7869
Access Cover
Anodize surface treated
01-068-8380
Retaining Strap
3.100" overall length 0.500" overall width 0.062" material thickness curved arch