Serving our customers with quality and safety first.
recess, same shape as the periphery
0.217in. and 0.223in. ⁓15/64"
9.313in.
0.040in.
rectangle, four holes
13.938in.
0.062in.
11.250in.
9.000in.
1.125in.
0.516in.
2.750in.
0.040in.
turnlock fastener
unthreaded hole
itwo each reinforcement beads molded into top of cover dim typical for both beads l 11.500 in.w 0.938 in.protusion h 0.250 in.located from side EDGE2.000 in.to center of BEAD-End of beadto edge of cover 1.000 in.drain HOLE-Dia 0.147 located lower left hand corner in top; upper end side has a rectangular slot OPENING-Molded rolled flange with 0.125 in.bend RADIUS-Protruding 0.188 in.above end SURFACE-Dim of OPENING-W 3.000 in.-d 2.000 in.inside corner rad 0.250 in.located 0.688 in.from right hand side of cover to edge of slot; lower end side has a slot OPENING-Molded rolled flange with 0.125 in.bend RADIUS-Protruding 0.188 in.above end SURFACE-Dim of opening w 1.750 in.depth 1.875 in.to an inside end radius of slot 0.875 in.slot located 2.938 in.from right hand side of cover to edge of slot; upper right hand side of cover has a slot opening located 0.438 in.fromedge of slot to top edge of COVER-Dim of slot w 1.188 in.d 2.375 in.with inside corner rad 0.250 in.
plastic
A rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see door, access (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
Defense logistics agency, enterprise business systems
SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.
SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.
MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.
MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category
IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.