01-234-0768
Ring Master Setting Gage
Used on kc135r acft. gaging master; used to calibrate checking fixture, 856A5507G03
01-234-0807
Comparator Electronic Gage
Used on kc135r acft. used to measure geometry of turbines blades
01-234-1096
Profile Gage
Used on b-52 g/h sr. gage, azimuth locating; used to properly locate the zimuth drive pin when mounting the azimuth drive on the strategic radar antenna, assuring proper mechanical alignment for interchangeability of the sr antenna azimuth drives, and alignment during antenna repair or retrofit of the b-52 radar antenna to the sr configuration
01-234-1115
Ring Master Setting Gage
Used on kc135r acft. gaging master; used to calibrate checking fixture, 856A5506G03
01-234-1116
Ring Master Setting Gage
Gaging master
01-234-8550
Profile Gage
Used on f110 engine. gage, engine exhaust; used to measure the primary
01-235-6029
Crimping Tool Gage
Go gage 0.9990, minus 0.0000/plus 0.0005 in.; no-go gage 0.1130, minus 0.0005/plus 0.0000 in.; hex size 3/8 in., o/a lg 4.000 in.
01-235-6030
Crimping Tool Gage
Go gage 0.1550, minus 0.0000/plus 0.0005 in.; no-go gage 0.1690, minus 0.0005/plus 0.0000 in.; hex size 9/16 in., o/a lg 4.750 in.
01-235-6031
Crimping Tool Gage
Go gage 0.7770, minus 0.0000/plus 0.0005 in.; no-go gage 0.0910, minus 0.0005/plus 0.0000 in.; hex size 3/8 in., o/a lg 4.000 in.
01-236-3557
Sine Plate
Used to accurately verify that first article components meet government specifications
01-236-3558
Sine Plate
Used to accurately verify that first article components meet government specifications
01-236-5796
Comparator Electronic Gage
Used on f16 std inu. used as a level
01-236-6811
Angle Solid Plate
01-237-4465
Comparator Electronic Gage
Used to set a wide range of machine tooling; c/o a vertical rotating presetting spindle with integral no. 50 taper mounted in a cast iron base, arranged with a vertical
01-238-5195
Ring Master Setting Gage
01-240-2227
Profile Gage
Used on 1450-00-930-8749.
01-240-2364
Plug Plain Cylindrical Gage
01-241-3026
Coating Thickness Gage
Analyzer, surface
01-241-3274
Plug Plain Cylindrical Gage
Consists of 1 shank, matl stl qq-s-624, ht to rc 40-46;
01-241-3275
Plug Plain Cylindrical Gage
Contained in molded plastic blocks using 4 stl cabinets which may be used side by side or on top of one another
01-241-3276
Surface Plate
6 in. thk; metal drawers, metal cabinet, metal bases, aerial shelf, electrical outlet strip
01-241-7999
Profile Gage
Used on f108 engine. gage, blade inspection; used to inspect blade tip shroud notch dimension of lpt blades after finish grinding; consists of 1 support bearing on the fixture for installing; 1 feeler, held by a compression spring, held by 2 plungers; 1 cover, holding the spring, secured by 2 springs; 1 dial indicator, fitted w/a federal point, fastened to support, by 1 screw; 2 screws, secure support, and cover, to support; and stored in a container
01-241-9967
Surface Plate
01-241-9968
Surface Plate
01-242-2107
Comparator Electronic Gage
C/o linear measurement range of 0f 0-12 in. for external measurements
01-242-2208
Plug Thread Gage
Tri-internal thread gaging system, range 1 3/4-10 in.
01-242-6432
Snap Fixed Gage
3.500" overall length
01-242-6684
Surface Plate
Surface size is 36 in. x 36 in., flatness unilateral tolerance is .0002 in., thickness is 6 in., weight is 710 lb.; e/i ta-854 F107 engine
01-243-5109
Plug Countersink Gage
01-244-1334
Profile Gage
Used on f108 engine. gage, fixture; used to check notch faces on blade tip shroud of fan blades; consists of blade root support w/a turning root support for blade root positioning, a blade shroud bracket for blade tip shroud positioning, a toggle clamp for blade tip shroud securing, two supports for checking tip shroud notches of fan blades, one master for calibrating checking tool set, and three eyes shoulder for lifting tool set assy
01-244-1335
Profile Gage
Used on f108 engine. gage, fixture; used to check seal teeth on fan blade tip shroud after grinding; consists of two supports, one dial gage support made of a welded steel angle bracket w/three positions for installation of the dial gage, one masters support made of a welded angle bracket fitted w/three tenons
01-244-1336
Profile Gage
Used on f108 engine. ngage, fixture; used to check notch faces on blade tip shroud of fan blades after machining; consists of two supports, one dial gage holder made of a welded steel angle bracket support, fitted w/two concentric arms, each supporting a checking ball
01-244-3084
Comparator Electronic Gage
Dim:5/8 in. x 1/8 in. x 3 3/8 in., weight:2 oz.; contact point:hardened steel-gold plated with 4-48 thread, gage tip travel .040 in., gage tip travel to zero position .006, gage pressure 20-30 grams, repeatability 100 pct. mounting:standard 1/4 in. hole with 1/4 in. mounting shoulder, cable length 42 in., gage head is electronically matched for use with p/n 54-605-000, electro comparator amplifier
01-244-6767
Comparator Air Gage
4-1/2 in. dia; al
01-244-6768
Comparator Air Gage
4-1/2 in. dia; al
01-244-6769
Comparator Air Gage
2-1/2 in. dia; al
01-245-7329
Profile Gage
Used on f112 engine. gage, seating; will have scribed
01-245-7330
Profile Gage
Used on f112 engine. gage, endplay; item is used to establish the base line measurement
01-245-7331
Profile Gage
Used on f112 engine. gage, seating; item is 6 1/4 in. long, 1 1/2 in. wide, 1/16 in. thick, w/black oxide finish, weighs 4 ounces, made of hardened plain carbon steel, and has scribed
01-245-7332
Profile Gage
Used on f112 engine. gage, concentricity; used to verify the concentricity of the fuel slinger
01-245-7342
Profile Gage
Used on f112 engine. fgaging master; used to establish the forward face clearance of the hp compressor by use of gage, weighs approx. 3 lbs., has natural finish, made of hardened steel, measures 4 1/4 in. x 2 5/8 in. x 1 in.
01-245-7350
Profile Gage
Used on tf39ge-1c. gage, inspection; used to measure the no 1 fan blade dovetail thickness to prevent interference with the no 1 stage disk; heat treated tool steel w/ black oxide finish
01-245-7964
Profile Gage
Used on f12 engine. igaging master; used to establish the backface clearance between the hp compressor rotor assy
01-245-9089
Surface Plate
01-246-0020
Comparator Air Gage
01-246-0262
Comparator Air Gage
01-246-1554
Profile Gage
Used on f112 engine. 0gage, clearance; used to establish the forward face clearance of the hp compressor, weights approx. 10 lbs., anodize finsih, material is aluminum
01-246-1555
Disk Master Setting Gage
Used on f112 engine. gage, master; consists of a rigid welded alum. framework w/a seperate hand held retainer w/dial indicator; used to calibrate/verify the TL2860, engine envelope fixture, item no. 0260
01-246-8642
Profile Gage
Used on f16 acft. template, access cover; used to trim the new eop in this aft inboard corner during repair; item is 12 in. long, 12 in. wide,
01-247-0361
Comparator Air Gage
Used on 2320011077153.
