01-558-8277
Hydraulic Jack Handle
Used on wheeled tanker, uk tanker mmt. kit, hydraulic jack handle
01-559-0645
Terminal Hand Crimping Tool
8.500" overall length one hand operation; force weight of 3.5 tons; automatic relief valve with audible click to prevent over compression; 360 deg rotating head
01-559-1556
Crimping Tool Die
0.426" overall width die assembly constists of stationary
01-559-2377
Socket Wrench Handle
5.250" overall length special lowell ratchet arm no. 21 s 1/2", cut down to 5-1/4" length, all parts to be zinc plated (0.0005" min.) (astm-b-633-type ii, olive drab chromate-luster-less) ratchet
01-559-3193
Screw Quick Adjusting Clamp
Used on for use on mrap mind resistant ambush protectant vehicle. consists of items FD0840 round bar 012 x 410 mm lg., FD0839 round bar 010 x 183 mm lg.
01-559-3876
Spanner Wrench
17.000" overall length 3.250" overall width used to instal p/n 05033600-1, iem downrun cables; material: 1018 or 820 steel, heat treated, nickel plated; thickness .5"
01-559-4139
Pin Remover
Used on predator.
01-559-4140
Seal Inserter
Used on predator.
01-559-4841
Trowel
Used on interim vehicle mounted mine detection (ivmmd) mk ii system 2355-01-542-7908. item 4; field repair parts
01-559-5096
Seal Inserter
Used on interim vehicle mounted mine detection (ivmmd) mk ii system 2355-01-542-7908. field repair parts
01-559-5097
Preformed Packing Inserter
Used on interim vehicle mounted mine detection (ivmmd) mk ii system 2355-01-542-7908. field repair parts
01-559-5112
Socket Wrench Socket
Used on interim vehicle mounted mine detection (ivmmd) mk ii system 2355-01-542-7908. field repair parts
01-559-5115
Socket Wrench Socket Set
Used on interim vehicle mounted mine detection (ivmmd) mk ii system 2355-01-542-7908. field repair parts
01-559-5116
Seal Inserter
Used on interim vehicle mounted mine detection (ivmmd) mk ii system 2355-01-542-7908. field repair parts
01-559-5117
Seal Inserter
Used on interim vehicle mounted mine detection (ivmmd) mk ii system 2355-01-542-7908. item 13; field repair parts
01-559-6486
Socket Head Screw Key
Long bit
01-559-6630
Scratch Awl
5.875" overall length
01-559-6801
Electrical Contact Inserter
Used on austrian government. plug holding block
01-559-7380
Wire Band Hose Clamping Tool
Used on for use by government of denmark. 10 pack thriftool; applies tension, 3/16" - 3/8" wide band, band fast, band it junior clamps
01-559-7694
Hand Roller
Used on government of united kingdom. solid cast aluminum frame; 1 inchsteel axle; 4.5 inch rubber roller; used to roll down vinyl graphics for paper tape or speedpress applications
01-559-7734
Screw Extractor
Socket type with left-hand internal spiral flutes; for extracting hex head fasteners; 3/8 in. female sq drive; 3/4 in. male hex drive; 1-1/16 in. o/a lg; for use with wrenches, impact wrenches
01-559-7965
Torque Wrench
01-559-8019
Hand Roller
12.000" overall width multi-purpose roller; used to pick up dust
01-559-8703
Screw Extractor
Socket type with left-hand internal spiral flutes; for extracting hex head fasteners; 3/8 in. female sq drive; 3/4 in. male hex drive; 1-1/16 in. o/a lg; for use with wrenches, impact wrenches
01-559-8704
Screw Extractor
Socket type with left-hand internal spiral flutes; for extracting hex head fasteners; 3/8 in. female sq drive; 3/4 in. male hex drive; 1-1/16 in. o/a lg; for use with wrenches, impact wrenches
01-559-8705
Screw Extractor
Socket type with left-hand internal spiral flutes; for extracting hex head fasteners; 3/8 in. female sq drive; 7/8 in. male hex drive; 1-1/16 in. o/a lg; for use with wrenches, impact wrenches
01-559-8706
Screw Extractor
Socket type with left-hand internal spiral flutes; for extracting hex head fasteners; 3/8 in. female sq drive; 1 in. male hex drive; 1-1/16 in. o/a lg; for use with wrenches, impact wrenches
01-559-8707
Screw Extractor
Socket type with left-hand internal spiral flutes; for extracting hex head fasteners; 3/8 in. female sq drive; 3/4 in. male hex drive; 1-1/16 in. o/a lg; for use with wrenches, impact wrenches
01-559-8708
Screw Extractor
Socket type with left-hand internal spiral flutes; for extracting hex head fasteners; 3/8 in. female sq drive; 3/4 in. male hex drive; 1-1/16 in. o/a lg; for use with wrenches, impact wrenches
01-559-8709
Screw Extractor
Socket type with left-hand internal spiral flutes; for extracting hex head fasteners; 3/8 in. female sq drive; 1 in. male hex drive; 1-1/16 in. o/a lg; for use with wrenches, impact wrenches
01-559-8710
Screw Extractor
Socket type with left-hand internal spiral flutes; for extracting hex head fasteners; 3/8 in. female sq drive; 5/8 in. male hex drive; 1-1/16 in. o/a lg; for use with wrenches, impact wrenches
01-559-8711
Screw Extractor
Socket type with left-hand internal spiral flutes; for extracting hex head fasteners; 3/8 in. female sq drive; 5/8 in. male hex drive; 1-1/16 in. o/a lg; for use with wrenches, impact wrenches
01-559-8712
Screw Extractor
Socket type with left-hand internal spiral flutes; for extracting hex head fasteners; 3/8 in. female sq drive; 1-1/16 in. male hex drive; 1-1/16 in. o/a lg; for use with wrenches, impact wrenches
01-559-8713
Screw Extractor
Socket type with left-hand internal spiral flutes; for extracting hex head fasteners; 3/8 in. female sq drive; 7/8 in. male hex drive; 1-1/16 in. o/a lg; for use with wrenches, impact wrenches
01-559-8752
Spanner Wrench
Used on MK21.
01-559-9182
Terminal Hand Crimping Tool
Dieless crimping tool to 500 kcmil (mcm)
01-559-9188
Electrical Contact Inserter
Used on auatrian government. 2-circuit plug insertion fixture
01-559-9189
Terminal Crim Contact Positioner
Used on austrian government. contact guide pin
01-559-9246
Screw Extractor
Socket type with left-hand internal spiral flutes; for extracting hex head fasteners; 3/8 in. female sq drive; 5/8 in. male hex drive; 1-1/16 in. o/a lg; for use with wrenches, impact wrenches
01-559-9255
Electrical Contact Inserter
Used on f100-pw-220,-220e,-229. set, pusher/expander pusher is cylinder shaped, made of steel, stepped down in size at one end, expander is cone shaped, and prepares the emi band for loading by the pusher into the plug end, PWA70765 handle is used to hold cone expander while using the pusher to install emi band
01-559-9263
Terminal Hand Crimping Tool
7.750" overall length hand tool frame only; die set is not included
01-559-9264
Caulking Gun Nozzle
4.000" overall length plastic; disposable
01-559-9265
Caulking Gun Nozzle
6.000" overall length plastic; disposable
01-559-9266
Caulking Gun Nozzle
4.000" overall length plastic; disposable
01-559-9267
Caulking Gun Nozzle
4.000" overall length plastic; disposable
01-559-9268
Caulking Gun Nozzle
4.000" overall length plastic; disposable
01-559-9269
Hot Line Stick
Telescoping; 4 sections; retracts to less than 4 ft for storage
01-559-9270
Caulking Gun Nozzle
2.500" overall length plastic; disposable; no orifice
01-559-9273
Socket Wrench
Thin head wrench; allows the warfighter to completely torque down the environmental gland on the jps-400 splice protection sleeve; wrench is cut down to size
01-559-9274
Caulking Gun Nozzle
4.000" overall length plastic; disposable
