01-504-9713
Open End Wrench
18.000" overall length chromium surface treated
01-504-9714
Open End Wrench
11.938" overall length chromium surface treated
01-504-9715
Open End Wrench
10.438" overall length chromium surface treated
01-504-9716
Open End Wrench
11.188" overall length chromium surface treated
01-504-9717
Open End Wrench
12.750" overall length chromium surface treated
01-505-0575
Leveling-support Jack
Used on aircraft ladder truck. 5000.0 lb capacity; heavy duty gears
01-505-1522
Hydraulic Hand Jack
01-505-1791
Hand Hammer
Driver, round hd
01-505-2166
Friction Igniter
01-505-2264
Mechanical Puller
01-505-2422
Plier Clamp
Line clamp pliers; for use with tubes or wires clamped together with point of screw on back of clamp
01-505-2424
Plier Clamp
Line clamp pliers; for use with clamps or studs anchored on flat surfaces
01-505-3193
Screw Quick Adjusting Clamp
Used on sea sprite helicopter. stock size 0.50 dia x 1.81; material 4130 stl bar, material spec mil-s-6758; heat treat to 125, 000 psi min ts rc 27-32 per kps 219, class ii; cadmium plate per qq-p-416 type ii class a
01-505-3519
Torque Wrench Adapter
Used on apache, helicopter.
01-505-3524
Torque Wrench Adapter
Used on apache, helicopter.
01-505-3856
Flat Tip Screwdriver
10.250" overall length
01-505-3944
Socket Wrench Handle
Used on turbo prop engines (t58). nut set t handle
01-505-3962
Mechanical Puller
Used on mv-22 aircraft; cv-22b se; spec gse allow (hv-22b). navy: puller tool set, air
01-505-4344
Socket Wrenc Crowfoot Attachment
0.438" overall length 0.438" overall width chromate surface treated 56 flare nut
01-505-4346
Socket Wrenc Crowfoot Attachment
0.719" overall length 0.984" overall width chromate surface treated 56 flare nut
01-505-4347
Socket Wrenc Crowfoot Attachment
0.438" overall length 0.438" overall width chromate surface treated 56 flare nut
01-505-4349
Socket Wrenc Crowfoot Attachment
0.812" overall length 1.156" overall width chromate surface treated 56 flare nut
01-505-4350
Socket Wrenc Crowfoot Attachment
0.859" overall length 1.250" overall width chromate surface treated 56 flare nut
01-505-4351
Socket Wrenc Crowfoot Attachment
0.938" overall length 1.312" overall width chromate surface treated 56 flare nut
01-505-5784
Hand Shovel
Aluminum blade; oval-shaped tubes increase prying strength
01-505-8057
Tube Hand Flaring Tool
01-505-8499
Torque Wrench Adapter
Used on f100-pw-229. adapter, torque-high pressure tie-rod offset
01-505-9309
Mechanical Puller
Used on turbo prop engines (t58). navy-puller mechanical, aircraft
01-505-9822
Caster Hand Fork
Used on agm-86 container. 21.750" overall length 8.000" overall width hand tool designed to rotate casters to a locking position while under stress of the load imposed
01-505-9828
Mechanical Puller
Used on f119 engine. knicker puller length 19 in; max width (around spool area) 3 in; puller-4/5 oil/air tubes
01-505-9852
Bearing And Bushing Inserter
Used on konrad marine model 520 stern drive (30-221).
01-505-9853
Electronic Equipm Alignment Tool
Used on inline inc. electronic equipment.
01-505-9854
Spanner Wrench
Used with values no.09941
01-505-9855
Socket Head Screw Key
Ball end l-handle
01-506-0584
Terminal Hand Crimping Tool
01-506-0845
Bearing And Bushing Inserter
Used on konrad marine model 520 stern drive (30-221).
01-506-0847
Bearing And Bushing Inserter
Used on konrad marine model 520 stern drive (30-221).
01-506-0848
Bearing And Bushing Inserter
Used on konrad marine model 520 stern drive (30-221).
01-506-0849
Bearing And Bushing Inserter
Used on konrad marine model 520 stern drive (30-221).
01-506-0850
Bearing And Bushing Inserter
Used on konrad marine model 520 stern drive (30-221).
01-506-3892
Terminal Hand Crimping Tool
Used on grounding kit. crimping tool
01-506-3914
Valve Spring Compressor
01-506-3915
Nutdriver
Wrench assembly, socket
01-506-4355
Mechanical Puller
Used on konrad marine model 520 stern drive (30-221).
01-506-4357
Spanner Wrench
Used on konrad marine model 520 stern drive (30-221). retainer nut wrench
01-506-4358
Seal Inserter
Used on konrad marine model 520 stern drive (30-221).
01-506-5307
Switch Adjusting Tool
Used on light armored vehicle. switch adjusting
01-506-5416
Final Drive Assemb Alignment Pin
Used on asds imd pse.
01-506-6224
Socket Wrench Socket
Used on konrad marine model 520 stern drive (30-221). for upper
01-506-8827
C Clamp
Used on f108 engine. glamp set, hpt rotor consists of three aluminum "c" clamps, with hand screw at one end of each clamp supplying clamping force, which is opposed by a nylon block mounted at the opposite end of the clamp
