01-476-1438
Hydraulic Hand Jack Kit
Universal hydraulic tool box set includes enerpac pump p-392, hose hc-7206, cylinder rc-256, gauge gp-10s
01-476-1516
Seal Inserter
Used on forward repair system model m7; nsn 4949-01-463-7940; tm 9-4940-361-23.
01-476-1660
Flat Tip Screwdriver
Used on xtc model 340g pressure transmitter. magnetic; 12 per pkg
01-476-1662
Spanner Wrench
Used on model 340g pressure transmitter. xtc enclosure cap wrench, 12 pack face lug
01-476-2625
Hydraulic Hand Jack
Handle swivels 360.0
01-476-2631
Bearing And Bushing Remover
Used on in support of f414. 4.500" overall length
01-476-3952
Torque Wrench Adapter
Used on v-22 osprey. adapter, torgue wrench
01-476-4083
Electrical Connector Inserter
Used on f-16 aircraft. tool, nvis tether insertion
01-476-4575
Piston Ring Compressor
Used on f-18 fighter aircraft. 8.8 in l x 8.8 in w x 3.1 in h; 38.9 lbs; steel with cadmium plating
01-476-4577
Spanner Wrench
Crescent shaped with keys at ends & middle to fit gland nut with a 1/2" drive handle cadmium surface treated
01-476-4662
Socket Wrench Adapter
Used on ae2100d3 engine in the c-1305.382j aircraft. attached to the torque tupe
01-476-4733
Open End Wrench
Single head
01-476-4737
Socket Head Screw Key Set
9.000" overall length
01-476-6372
Pliers
Used on tool kit, p/n3355485-1. 7.000" overall length
01-476-6373
Flat Tip Screwdriver
Used on p/n 3355485-1 tool kit. 4.000" overall length
01-476-6374
Flat Tip Screwdriver
Used on p/n 3355485-1 tool kit. 6.000" overall length
01-476-6375
Adjustable Wrench
Used on tool kit, p/n3355485-1. 6 in long
01-476-6376
Cross Tip Screwdriver
Used on p/n 3355485-1 tool kit.
01-476-6377
Pliers
Used on tool kit, p/n3355485-1. 7.000" overall length
01-476-6378
Adjustable Wrench
Used on tool kit, p/n3355485-1. 12 in long
01-476-6379
Fuse Puller
Used on tool kit, p/n3355485-1.
01-476-6599
Spanner Wrench
01-476-6774
Slip Joint Pliers
Used on tool kit, p/n3355485-1.
01-476-6880
Socket Wrench Adapter
01-476-6890
Spanner Wrench
Used on f/a-18 acft se/gse. (navy) wrench spanner-mlg wrench is equipped with keys to interface the cylinder cap slots
01-476-7390
Socket Head Screw Key
Used on 151.2-25-60 toolholder.
01-476-7556
Hand Intrenching Tool
Nom lgth 23in., weight 39.04 oz., assembly contains - handle, nylon, 1; washer, collet, aluminum-7075-T6, 1; collet, nylon, 1; spring retainer, nylon, 1; spring, stainless steel, 2; bolt, sz 48mm x M8 (.1889in.) , aluminum, grade 8.8, 1; nut, insert, nylon-class 8, 2; spindle, drilled, aluminum-7020-T6, 1; pin, aluminum-6061-T6, 1; shaft, steel, ptb, 1; blade, shovel, steel, boron, size 9-29/64in. lg. (240.1062mm) , 1; bolt, sz 30mm (1.18110in.) x M8, aluminum, grade 8.8, 1
01-476-8117
Sealant Dispenser
Rotanium rota gun
01-476-8194
Ratchet Wrench
355.0mm overall length chromium surface treated
01-476-9377
Bearing And Bushing Inserter
Used on allison series hd/b 500 transmissions.
01-476-9380
Bearing And Bushing Inserter
Used on allison series hd/b 500 transmissions.
01-476-9576
Spanner Wrench
Used on support equipment for f/a-18 afct. relief valve made of stainless steel
01-476-9588
Torque Wrench Adapter
Used on support equipment for f/a-18e/f aircraft. mlg orifice sup tube torque wrench adapter shaped like a half crescent with a pin projecting radially inward at the thick end of the crescent; also at this end is a 0.500 inch square drive cadmium drive surface surface treated
01-477-0957
Bearing Stakin Installation Tool
Used on apache attack helicopter.
01-477-0960
Bearing Stakin Installation Tool
Used on apche attack helicopter.
01-477-1198
Bearing And Bushing Remover
01-477-1249
Bearing And Bushing Inserter
Bushing installer
01-477-1625
Screwdriver Bit
1.000" overall length
01-477-1626
Screwdriver Bit
1.000" overall length
01-477-1627
Screwdriver Bit
1.500" overall length
01-477-2314
Retaining Ring Installation Tool
Used on v-22 aircraft. (navy) installation tool, secondary lock used to facilitate the installation of the secondary lock piston during reassembly of the actuator; tool is a ring shaped device, approximately 2.500" in diameter
01-477-2319
Open End Wrench
Used on v-22 osprey. 14.000" overall length used to torque pitch link tube jam nuts
01-477-2749
Bearing And Bushing Inserter
Used on allison series hd/b 500 transmissions.
01-477-3632
Spanner Wrench
Used on attack helicopter apache.
01-477-3702
Hand Hammer
Hammer, slide
01-477-3703
Bearing Stakin Installation Tool
Installer, bearing
01-477-3704
Valve Tire Repair Holding Tool
Flange holding tool
01-477-3707
Mechanical Puller
Puller, bearing
01-477-3709
Hand Screw Jack Extension
Extension, driver hand
01-477-3712
Open End Wrench
Wrench, serpentine belt
