01-433-4829
Socket Wrench
Used on nsn 2320-01-360-1899, cargo vehicle. 17.500" overall length oxide surface treated
01-433-4850
Spanner Wrench
Used on h-46 helicopter. 5.000" overall length 5.000" overall width
01-433-5334
Socket Head Screw Key
01-433-5336
Socket Head Screw Key
01-433-5339
Open End Wrench
01-433-5983
Splicing Sleeve Compressing Tool
01-433-6041
Socket Wrench Socket
01-433-6042
Connector Fiber Opt Removal Tool
01-433-6072
Mechanical Puller
Used on f100-pw-229. puller, SERD7234 bearing
01-433-6182
Bearing And Bushing Inserter
Used on h-46 helicopter. 9.000" overall length
01-433-7046
Mechanical Puller Attachment
Used on f100-pw-229. puller, fan inlet case
01-433-7603
Mechanical Puller Set
Used on ch-47 helicopter rotor head assy. puller assy bearing pitch housing
01-433-7837
Seal Inserter
Used on h-46 helicopter. 1.000" overall length installation tool, seal
01-433-8362
Spanner Wrench
4.750" overall length
01-433-8386
Socket Wrench Socket
Chromium surface treated internal-internal
01-433-8387
Spanner Wrench
01-433-8782
Spanner Wrench
Adjustable
01-433-8891
Retaining Ring Pliers Set
Used on f100pw220. set, compressor tconsists of two specially designed pliers
01-434-0972
Spanner Wrench
Removal tool, lte, lock screw piece 1 of 2; made from piece 2, tool, weldment
01-434-1249
Mechanical Puller Forcing Screw
For removing no. 1290-011 unit injector
01-434-1251
Valve Spring Compressor
01-434-2033
Tube Hand Flaring Tool
Fluid adapter/dyna tube; resistoflex end; thd size 5/16-24
01-434-2252
Valve Spring Compressor
Used on caterpillar 3600 series engines.
01-434-2265
Seal Inserter
Used on chrysler vehicles.
01-434-2266
Mechanical Puller Adapter
Used on chrysler vehicles.
01-434-2269
Bearing And Bushing Inserter
Used on talon vehicles with 4 wheel drive manual transaxle (1990 to current).
01-434-2273
Mechanical Puller Adapter
Used on chrysler vehicles. used with miller no. c-293-pa puller press
01-434-3459
Screwdriver Bit
1.000" overall length
01-434-3460
Screwdriver Bit
1.000" overall length
01-434-3461
Screwdriver Bit
1.000" overall length
01-434-3462
Screwdriver Bit
1.000" overall length
01-434-3463
Screwdriver Bit
1.000" overall length
01-434-3576
Mechanical Puller
Used on f100pw229. pusher puller consists of a split ring that locks behind wear sleeve flange od
01-434-3577
Mechanical Puller
Used on f100pw229. pusher puller, sleeve, sealing specially designed puller of steel consisting of a base plate, locator, clamping devise, cylinder & adapter
01-434-3578
Mechanical Puller Attachment
Used on f100pw229 acft eng. fixture, holding-compressor bleed tube specially designed attachment fixture used with pusher/puller (serd 7837) ; dim.: 7.8 in. h x 10.8 lg x 6.0 w.ftldgused to hold
01-434-4054
Wire Twister Pliers
8.750" overall length with side cutter
01-434-4065
Socket Wrench
Used on viking sprinklers, viking corp the
01-434-4066
Open End Wrench
Used on model a decor sprinklers, viking corp the
01-434-4182
Combination Box And O Wrench Set
Standard lengths; full polish
01-434-4183
Push-pull Screw Jack
Ratchet type; 7-1/2 ton pull
01-434-4184
Combination Box And O Wrench Set
Standard lengths; full polish
01-434-4186
Combination Box And O Wrench Set
Standard lengths; full polish
01-434-4187
Combination Box And O Wrench Set
Standard lengths; full polish
01-434-4188
Combination Box And O Wrench Set
Standard lengths
01-434-4189
Seal Inserter
Used on navsea port plugging tool assembly. installation tool, seal
01-434-4191
Combination Box And O Wrench Set
Standard lengths; full polish
01-434-4192
Combination Box And O Wrench Set
Standard lengths; full polish
01-434-4665
Pliers
Used on f100pw229. adapter, pin wconsists of commercially available pliers, machined at throat to acceptwelded on extenders on the upper
01-434-4687
Socket Wrench
Used on clausing corp. 15 in. lathe; tool post assembly. single socket t
01-434-4689
Socket Wrench
Used on clausing corp. 13 in. lathe; tool post assembly. single socket t
